What size pulls for what size Drawers?
What size pulls for what size Drawers?
Determine Size While there is no set rule, we generally recommend that the pull length is approximately 1/3 of the cabinet or drawer width. Small Drawers that are 12” or less typically work best with a pull that is 3” to 4” long or a knob that is 1” in diameter.
How do you measure for replacement drawer pulls?
Place the drawer pull on a work surface with the threaded posts facing up. Measure from the center of the screw hole in one threaded post over to the center of the other screw hole with a tape measure. This is the measurement required when selecting replacement pulls.
What size drawer needs two pulls?
Drawers wider than 18″ need two knobs/pulls, whereas drawer narrower need only one. If a drawer is wide enough to need two knobs, they should be set about 1/6th of the drawer length from each end (roughly).
How do you measure cabinet hardware?
Center-to-Center– the distance from the CENTER of one screw hole to the CENTER of the other screw hole. This is the standard industry measurement for sizing cabinet handles.
Do drawer pulls have to match faucet?
Does cabinet hardware have to match your faucet? No. But, traditionally kitchens and bathrooms will match hardware finishes to the faucet to tie the finishes in the room together. Matching cabinet hardware to your faucet creates a cohesive look.
Are cabinet pulls standard size?
For standard size cabinetry (dimensions of 12″ – 36″) the most common pull sizes are 3”, 4”, 96mm, and 128mm center to center (from one screw hole to another). Standard knob sizes are 1 1/4″ or 1 3/8″.
Is black hardware trendy?
Every few years, it seems like the trendy metal of choice for hardware, decor, and finishes shifts in the design world. While black is certainly showing up everywhere, the matte black trend is showing up mainly in kitchen and bathroom design.
