What would cause a misfire on cylinder 4?

What would cause a misfire on cylinder 4?

P0304 indicates that cylinder number 4 is experiencing misfires. A misfire occurs when an insufficient amount of fuel is burning in a cylinder. A misfire from one or more cylinders can be caused by many reasons from a faulty ignition system, fuel system, or internal engine failure.

What causes misfire in Jeep Wrangler?

Worn and old spark plug wires are common causes of random misfires. Replace spark plugs and wires if needed and recheck for misfires. If you have determined that your ignition system is operating correctly, there may be a problem within your fuel system that is causing the random misfires.

What happens if you misfire a Jeep Wrangler?

The P0304 trouble code will trigger the Wrangler’s service engine soon light. The vehicle itself may begin to run rough. It depends on how serious the misfire is. The vehicle may produce excess vibration, especially at lower RPM. Fuel mileage may suffer.

Where is the 4th cylinder on a Jeep Wrangler?

An important thing to understand when finding the location of Cylinder 4 is that it’s going to be the 4’th cylinder in the firing order of the vehicle, and not the 4’th cylinder that you might see when looking at the engine. The P0304 trouble code will trigger the Wrangler’s service engine soon light. The vehicle itself may begin to run rough.

What causes the p0304 trouble code on a Jeep Wrangler?

There are quite a few things that can cause the P0304 trouble code to trigger the Jeep Wrangler. Here are the most common problems that will throw the code. They are presented somewhat in order from most to least likely to be causing the code: Bad Spark Plugs – Spark plugs are one of the most common causes of P0304.

What causes a car to misfire with p0304 code?

If the ECU is not getting the right signal from these sensors, the vehicles timing is not going to sync up and it’ll misfire. Low Compression – If you have a leaking head gasket, bent valve, cracked head, etc.. that would cause compression to not be as high as it should, you’re going to get P0304.

https://www.youtube.com/watch?v=-rx1jC9ziL8

author

Back to Top