Where do you put the expansion tank on a water heater?
Where do you put the expansion tank on a water heater?
An expansion tank is generally installed directly above the water heater by means of a tee-fitting installed in the cold water delivery pipe. The expansion tank is usually installed horizontally, though it is acceptable to install it vertically if it is necessary because of space limitations.
Is an expansion tank required for a water heater?
While expansion tanks are required by code in most closed-loop water heater systems, they have a reputation for failing. Common expansion tank issues include: Rubber Diaphragm Wear Out.
Can you use a flex line for expansion tank?
There is a good chance you’re working with tight spaces, and if you need to, you can install a longer flex line and loop it around itself. You can also redirect it away from the expansion tank (being careful not to kink it) without compromising the installation.
What size expansion tank do I need for a 40 gallon water heater?
General Guidelines for Sizing an Expansion Tank
| Water Heater Capacity | Supply Pressure (psi) | Expansion Tank Size |
|---|---|---|
| 40 to 60-gallon | 40-50 psi | 2-gallon |
| 40 to 60-gallon | 60-80 psi | 3.2-gallon |
| 80-gallon | 40 psi | 2-gallon |
| 80-gallon | 50-60 psi | 3.2-gallon |
How close to the water heater does the expansion tank need to be?
18 inches
The items which should be installed in sequence in the cold water line are (1) the EXPANSION TANK must be installed at least 18 inches away from the cold water inlet fitting on the water heater, (2) the PRESSURE GAUGE, and (3) the PRESSURE REDUCING VALVE, if required, see Figure 1.
How do you support a horizontal expansion tank?
2 Answers. In general, the tank can be installed vertically above or below the plumbing, or horizontally. Typically, the tank is only required to be supported when installed in the horizontal position. Most smaller tanks are designed to be supported by the plumbing, when installed in the vertical orientation.
Can you install expansion tank upside down?
Expansion tanks can be installed in any direction. Whether oriented uprightly, horizontally, or even upside down, the expansion tank will function properly without any adverse effects. When putting an expansion in an abnormal position (specifically sideways or horizontally), make sure to support the tank.
What pressure should my expansion tank be set at?
between 50 and 60 PSI
The recommended water pressure is between 50 and 60 PSI. Thermal Expansion Tanks contain an air bladder which is pressurized with air, and expands and contracts to absorb the expanded water from the water heater. needed. Check the air pressure in the Expansion Tank using a tire gauge.
https://www.youtube.com/watch?v=P9iQxYQc2J0
