Where is the reset button on a suburban furnace?
If the furnace doesn’t have a power switch you can turn off, turn off the circuit breaker controlling the furnace, open the blower housing and locate the reset button on the side of the blower motor. Press it in until it clicks and then restore power to the furnace by turning the breaker back on.
Where is the model number on a suburban furnace?
Suburban Furnace that blows heated air through a grille The silver colored data plate with black printing will be located on the right side of the furnace combustion chamber assembly as you look at the appliance. The model number will be located on the data plate and will begin with “NT”, “GT” or “DD”.
How does a suburban RV furnace work?
Suburban furnaces installed in recreational vehicles are classified as Direct Vent Sealed Combustion Furnaces. A motor is used to drive an impeller wheel to draw intake air into the chamber to support combustion and force the exhaust gases through the furnace chamber to the outside atmosphere.
Is there a reset button on an RV furnace?
All furnaces are equipped with a reset button. They are generally red or yellow and are located inside the blower compartment. The reset button is a safety feature that will shut down the furnace when a problem is detected, often a hot or overheating furnace, before it trips the circuit breaker.
How do I test my RV furnace thermostat?
Troubleshooting Your RVs Thermostat
- Step 1 – Ensure You Have the Thermostat on the Correct Setting.
- Step 2 – Turn the Thermostat Down or Up 5-Degrees.
- Step 3 – Check and Replace the Thermostats Batteries.
- Step 4 – Air Blast the Thermostat.
- Step 5 – Test Connections and Wires.
How much propane does a RV furnace use?
The average-sized RV furnace will burn about 1/3 of a gallon of propane while running continuously for an hour. Based on this estimate, a gallon of propane = 3 hours of continuous RV furnace use.
What is the sf-30f tune-up kit for the furnace?
The Suburban Furnace Model SF-30F Tune-Up Kit comes in two variations. The first (Kit #1) has the old style burner access gasket which makes kit #1 applicable to the SF-30F between serial numbers 934701426 and 094101431, the second (Kit #2) has the new style burner access gasket which is applicable to the SF-30F above serial number 094101431.
Which kit is applicable to my sf-30f?
The first (Kit #1) has the old style burner access gasket which makes kit #1 applicable to the SF-30F between serial numbers 934701426 and 094101431, the second (Kit #2) has the new style burner access gasket which is applicable to the SF-30F above serial number 094101431. Please verify which kit is applicable to your furnace prior to ordering.
How big is a 32 lb suburban suburban?
SUBURBAN Suburban 32 pounds 20 x 9 x 23 inches SF-30FQ No SF-30FQ No Would you like to tell us about a lower price? What Tools Inside? Video Player is loading. This is a modal window. What Tools Inside? How are ratings calculated? To calculate the overall star rating and percentage breakdown by star, we don’t use a simple average.