Who makes the ZF 5 transmission?
Who makes the ZF 5 transmission?
ZF Friedrichshafen
Designed and built by the German company, ZF Friedrichshafen, the ZF5 transmission was available in both gas and diesel models of the Ford F-250, F-350 , and F-450 trucks. The Ford ZF5 transmission is also known under the alternate names of ZF 5-speed, ZF 5-speed, S542, S5-42, S547, S5-47, and S547M.
What year did the ZF5 transmission come out?
1987
ZF 5 Speed Transmission Sale Developed by the German manufacturer ZF Friedrichshafen Engineering in the year 1987, this transmission became the premiere manual for all F-series trucks until the year 2001.
How much does a ZF 5 speed weigh?
ZF 5 Speed Specs
| Transmission: | ZF S5-42 & S5-47 | |
|---|---|---|
| Max Input Torque: | ZF S5-47 | 470 lb-ft |
| Max GCWR: | 26,000 lbs | |
| Weight: | ~ 175 lbs | |
| Oil Capacity: | 3.2 liters, 3.38 quarts |
What fluid goes in a ZF 5 speed?
The ZF 5 speed manual transmission calls for 3.38 quarts (3.2 liters) of synthetic MERCON ATF (Ford part number E6AZ-19582-B) or Castrol TRANSMAX-S ATF. Yes, this manual transmission requires the use of automatic transmission fluid due to its tight design tolerances.
How much torque can a ZF 5 speed handle?
Max input torque rating on a ZF S5-42 was 420 ft-lbs. of Torque whereas the ZF S5-47 could handle 470 ft-lbs. of Torque.
How much does a T18 transmission weigh?
The cast iron T18 transmission case measures 11.87″ in length, 17.45†in height, and weighs approximately 145lbs. The T18 utilizes a cast iron top cover which is retained by six bolts.
How much torque can a zf5 handle?
According to Dieselhub.com there were two types of ZF5s produced: the ZF S5-42 for the 6.9/7.3 IDIs and the ZF S5-47 for the 7.3 Powerstrokes up to ’97. Max input torque rating on a ZF S5-42 was 420 ft-lbs. of Torque whereas the ZF S5-47 could handle 470 ft-lbs. of Torque.
How much power can a ZF 5 speed transmission handle?
Those transmissions are not any better then the zf-5 which is rated from 420 to 470 depending on version while the zf-6 is 520 to 650. nv5600 is rated for 550. A 4500 will not hold up to 500 because I was running less then 400 hauling and the dam things were breaking.
