Why are all the lights flashing on my Hotpoint Aquarius tumble dryer?
Why are all the lights flashing on my Hotpoint Aquarius tumble dryer?
Hotpoint tumble dryer all lights flashing When multiple lights are flashing on your tumble dryer and you’re unable to select a programme this indicates a software fault and you’ll need to contact a service engineer.
Why is my washer flashing?
A blinking sensing light indicates an underlying issue with the drain, spin, or any other function. There are several such problems that Whirlpool washers commonly run into. The washer will function only when the lid/door is completely closed and locked. The water pump belt in the washer has worn out or is damaged.
How do you know if your washing machine is clogged?
If you notice persistent, pooling water in your washing machine unit following cycles and do not perform any regular drain inspections, there’s a good chance your machine’s drains have clogged over time due to everyday use.
How do you reset a Hotpoint washer?
Motor Reset Procedure:
- Unplug the washer for 1 minute from the electrical outlet.
- Plug the washer back in and lift and lower the lid 6 times within a 12 second period. You have 30 seconds to start lifting and lowering the lid.
- The motor has now been reset and is ready for you to start a cycle.
Why are all the lights flashing on my dryer?
Either of these lights blinking means there’s an issue with the door, its latch, or the sensors that detect whether they are secured correctly. Check that the latch is securely fixed, laundry or other items are not caught in the door, and the door is closed and secured correctly.
Why does my Hotpoint tumble dryer keep stopping?
A blockage of lint can cause a lot of problems and if your tumble dryer suddenly starts shutting off then you should check your dryer’s lint filter. Cleaning the filter is relatively simple but finding it might not be. So, consult your tumble dryer’s instructions manual if you’re struggling to find it.
What are the error codes on my Hotpoint Aquarius washing machine?
Several error codes on Hotpoint Aquarius washing machines are indicated by flashing lights. These are just basic ones from models WMA30, WMA31, WMA32 & WMA33 although they may be the same for other Hotpoint Aquarius models using led lights.
How do you read error codes on a Aquarius?
Aquarius models with a proper digital display should indicate error codes in a more sophisticated manner using actual text such as F1.. .. This one is simple, and you should be to work it out yourself.
Why is the pre-wash light flashing on my washing machine?
The light should stop flashing at the end of the programme. Pre-wash light is flashing. This indicates a filling fault. The software in the washing machine believes that the correct amount of water has not gone into the machine during the maximum time allowed.
