Why did my hydro dip fail?
Why did my hydro dip fail?
Poor adhesion of pattern after hydro dipping If your material has oil on the surface or the primer is wet, the finished product will occur poor adhesion of pattern after water transfer inkjet.
Do you have to clear coat after hydro dipping?
STEP 11: CLEAR COAT Clear coating is highly recommended for all hydrographically decorated parts. This helps to seal in the inks and allows for a cleaner finished product. When the dipped part is dry, apply the clear top coating (matte, semi-gloss or high gloss) to finish off your newly dipped hydrographic part.
How long does it take for shoes to dry after hydro dipping?
Do not remove the paint until the outside of the shoe is dry. The inside of the shoe will take a day or two to dry out all the way. You can stuff the shoes with plain newsprint to facilitate the drying process.
Can you Hydro dip twice?
Sometimes you’re not happy with your initial hydro dip so you want to give it another coat to cover up the old paint. Or maybe you want to dip more than once to merge multiple graphics and create cool effects. If you’re going to do this make sure your product is dry before dipping again.
Why is my hydro dip lumpy?
Too little activator and it won’t stick properly and become clumpy, too much activator and it can become too thin and not stick properly either. So just a single coat of activator from about a foot or so away seems to work fine.
Can u Hydro dip crocs?
The best way to dye your Crocs a different color is to use a process known as hydro-dipping, or water transfer painting. It won’t take you more than 15-30 minutes of work to create a beautiful pair of custom Crocs.
Can you hydro dip in cold water?
What Happens if the Water Is Too Cold. One of the most common mistakes that people who are learning to do hydro dipping make is using water that is too cold. The film will not melt properly, so it may not conform to the item that you insert into the bath of water. The film may not stick properly to the item.
