Useful tips

Why does my Canon printer say load paper when there is paper?

author 0

Why does my Canon printer say load paper when there is paper?

If the paper cassette or multi-purpose tray is empty, the message appears on the display. Check if the paper is properly loaded in the paper cassette or multi-purpose tray. For the instructions on how to load paper, see “Loading Paper into the Paper Cassette” or “Loading Paper in the Multi-Purpose Tray.”

How do I feed paper to my Canon printer?

Load photo paper with the glossy side facing up. Slide the paper guides (D) to align them with both sides of the paper stack, being careful not to push the paper guides too hard against the paper. Always load paper in the portrait orientation (E). Loading paper in the landscape orientation (F) can cause jams.

What do I do if my Canon printer is stuck in the paper?

Solution

  1. Turn off the printer and unplug it.
  2. Retract the paper output tray and open the cover. Important.
  3. Check if jammed paper is under FINE cartridge holder.
  4. Hold jammed paper firmly in both hands.
  5. Slowly pull out paper, so as not to tear it.
  6. Make sure all jammed paper is removed.
  7. Close cover.

Why does my Canon printer want to print from the rear tray?

Based on the paper settings in the printer driver and the paper information registered on the printer, the printer automatically determines the paper source and feeds paper. Paper is always fed from the rear tray. Paper is always fed from the cassette.

How do you load a 4×6 paper into a Canon printer?

Loading Small Size Paper Such as 4″ x 6″ (10 x 15 cm)

  1. Prepare paper.
  2. Pull out cassette 1 from the machine.
  3. Slide the paper guide (A) in front and (B) on the right to open the guides.
  4. Load the paper stack WITH THE PRINT SIDE FACING DOWN, and place it in the center of cassette 1.

How do I clean the rollers on my Canon printer?

My Canon Account

  1. Prepare the printer.
  2. Open the printer driver setup window.
  3. Click Roller Cleaning on the Maintenance tab.
  4. Select Rear Tray, and click OK.
  5. Open the Rear Tray.
  6. Place a moistened cotton swab, etc. to one of the protrusions (A) of the feed roller shaft.
  7. Execute paper feed roller cleaning.

How do you clean pickup rollers?

Clean the Paper Pick-up Rollers (1) with a soft lint-free cloth moistened with water. Slowly turn the rollers so that the whole surface is cleaned. After cleaning, wipe the rollers with a dry, soft lint-free cloth to remove all moisture. Put the paper support firmly back in the machine.

author

Back to Top