Common questions

Why does my decoder keeps rebooting?

author 0

Why does my decoder keeps rebooting?

The main cause of the DStv Explora 2A keeps rebooting problem is a damaged DStv software. Often, Multichoice releases new decoder systems, and you can download them when you connect your decoder to the internet.

How do I fix a corrupted DStv decoder?

Insert the power cable, and don’t let go of the power button as your decoder powers up. It will bring up the word “CODE,” and to repair the corruption, press P-P+P-P+ on your remote. It will begin to format all the data on your decoder, and when it is done, it will reboot itself.

How do I flash my DStv decoder?

1131/1132

  1. Press and hold the STANDBY and P+ buttons simultaneously.
  2. Wait for the red and green lights to flash.
  3. The decoder will restart.

Why does my DStv keep freezing?

General pixilation and freezing occurs when there is a disruption in the TV signal, or there is a weak signal altogether. Check your connections: Wait for the signal to initialize. Make sure all cables connected on the set-top box and your TV are secure.

How do I fix my DStv Explora reboot?

  1. Hold the POWER button on your decoder down, till the front panel shows a blank screen 2. Then hold down the P+ button, until CODE appears on the front panel 3.
  2. If successful, please remember that it will take at least 48-72 hours for your BoxOffice and Catch Up to populate again.
  3. Enjoy your viewing.

How do I reset my decoder to factory settings?

Press the blue “DStv button” on your remote control. Then use the right arrow on the remote control to go to “Settings“. Use the down arrow to go to “System Settings“. Scroll down using the down arrow to select “Reset To Factory Default” then press “OK” on your remote control.

How do I clear my DStv error code?

If the Error code you see on your T.V set is any of these, just relax and follow this step to get it cleared.

  1. Go to www.DSTV.com.
  2. Select the type of Error code that you see on your T.V set, enter your smart card / Serial No, and solve the Captcha.
  3. Click “Reset Device”

Why is my DStv not working?

The problem is usually caused by a faulty LNB, a misaligned dish, loose connections, and bad weather elements. In fact, the majority of DStv signal problems are caused by bad weather elements and faulty DStv accessories. Signal problems make your DStv decoder to display signal errors.

How do I reset my DStv HD decoder?

How to reset your DStv decoder

  1. Press the blue “DStv button” on your remote control.
  2. Then use the right arrow on the remote control to go to “Settings“.
  3. Use the down arrow to go to “System Settings“.
  4. Now use the right arrow to go to the next menu and select “Reset Decoder Settings“

How do I reset my DStv decoder to factory settings without remote?

Process of how to reset DStv decoder without remote First, unplug the power button from your decoder and ensure it is completely turned off. You can check for this by ensuring all its lights are turned off, and none is blinking. Turn it back on and press the reset button on your decoder.

author

Back to Top