Contributing

Why does my Jabra headset microphone not working?

author 0

Why does my Jabra headset microphone not working?

Try unplugging and replugging the MIC jack. If you are using a desktop PC, try inserting the MIC jack at the motherboard’s back panel. Install the latest Sound card Driver. You can download it directly from the manufacturer’s website.

How do I reset my Jabra PRO 9460?

Jabra Pro 9460 Mono | FAQ | Jabra Support….To reset your Jabra device, follow these steps.

  1. In Jabra Direct, select your device.
  2. Click Device.
  3. In Device settings, click Reset to open the Restore device settings dialog.
  4. Click Apply.

How do I use the microphone on my Jabra headset?

To use the earcup microphones instead of the boom arm microphone, rotate and raise the boom arm and then press the Voice button on the boom arm. To use the boom arm microphone instead of the earcup microphones, lower and rotate the boom arm to position it close to your mouth.

Why is my headset working but not my mic?

If the mic works in the other headphone jack, it suggests this issue is probably caused by a faulty port. If your mic still doesn’t work, connect your headphone with a microphone to another device. If your mic does not work in another PC or smartphone you should contact the vendor of your microphone device for support.

How do I reset my Jabra PRO headset?

To reset, follow these steps:

  1. Put on your Jabra Pro 900 Series headset.
  2. Simultaneously press and hold the Mute button and both Volume buttons until the voice prompt says “Factory default”.
  3. Release the buttons. After resetting, the base will restart.

How do I reset my Jabra PRO 9400bs headset?

How do I manually reset my Jabra Pro 9400 Series headset?

  1. Unplug the base power supply from the power outlet.
  2. Remove the headset from the base.
  3. Press and hold (5 seconds) the Multi-function button until the LEDs on the boom arm rapidly blink red and turn off.
  4. Place the headset back onto the base.

How do I unmute my Jabra microphone?

To mute the microphone, move the microphone boom arm up. To unmute the microphone, move the microphone boom arm down. To answer an incoming call, move the microphone boom arm down.

How do I adjust my Jabra microphone?

Yes, you can adjust the microphone volume of the desk phone while you are on a call.

  1. Tap on the base to open the Settings menu.
  2. Tap or to adjust the microphone volume of the desk phone, and then tap to confirm your selection.

How do I pair my Jabra headset to the base?

Jabra PRO920 – Force Pair Headset to Base

  1. Unplug GN1000 Lifter/EHS, if you have from the base/charger unit.
  2. Dock headset onto base/charger unit.
  3. While docked, press and hold the Multi function button. Hold for 6-7 seconds/ White LED Indicator flashes 3 times.
  4. Plug your GN1000/EHS, if you have one.

How do I fix my mic not working?

Try the following solutions:

  1. Make sure that the microphone or headset is connected correctly to your computer.
  2. Make sure that the microphone is positioned correctly.
  3. Increase the volume of your microphone. Here’s how to do this in Windows 10: Select Start , then select Settings > System > Sound .

author

Back to Top