Why does my washer keep saying NF?
Why does my washer keep saying NF?
The nF error code on a Samsung front-load washer means that the washer isn’t filling with water. The solution is sometimes as simple as opening the water supply faucets behind the washer. Frozen water supply lines and hoses in winter also prevent the washer from filling.
How do I reset my digital Maytag washer?
- Unplug the washer for 1 minute from the electrical outlet.
- Plug the washer back in and lift and lower the lid 6 times within a 12 second period. You have 30 seconds to start lifting and lowering the lid.
- The motor has now been reset and is ready for you to start a cycle.
What does HR mean on washer?
If you are getting the Hr error code on your Samsung washer, this means the washer has a HEATER RELAY FAILURE. This error occurs when the washer has an issue with the main control board as the heater relay is a component on the control board.
Do Maytag Neptune codes?
The error code you are experiencing (DO) is indicating that the door is open on the dryer. If the dryer door is closed , you may have a bad dryer switch that may need replacing or a bad fuse on the dryer. You should also check the power cord on the dryer to be sure the cord is not damaged.
How do I clear the NF code on my Samsung washer?
If you get an nF error code, the first thing to do is shut off the power to the washing machine. Samsung washers have been known to have glitches in which the washer displays false error codes. Turning the power off and on will clear the false error code.
What does NF mean on Samsung washer?
unbalanced
When an UE error message is displayed on Samsung Washing Machine, it is indicating that the laundry load is unbalanced and has stopped the spin for safety reasons. Redistribute washing by adding or removing items to ensure a more balanced load.
What does HR mean on my Samsung washer?
How do I fix the HR on my Samsung washing machine?
- 1 – The first thing to do is unplug the Samsung washing machine for 10 minutes.
- 2 – Plug the washer back into power after 10 minutes and run a test wash.
- 3 – Remove power from the washing machine and visually check the wiring connections and wire harnesses on the main control board.
Can you reset a Maytag washer?
Press and hold the Start/Pause button for 3 seconds. All indicator lights should be off at this point. Reset the Washer: To reset (clear) the washer, rotate the Cycle Selector Knob counter-clockwise (left) to clear any sequence.
What is NF code on my washer?
The Samsung Washer Error Code nF Indicates to the Water Supply Error. It means that the water not filling into the washer or the washer is unable to get enough water for washing clothes. It is usually caused due to clogged drain hose or filter. There can be other issues as well, such as supply Tap is OFF or door is not locked correctly.
What are the problems with Maytag washers?
Common problems with Maytag Bravos washers include failure to start, water filling slowly, water leakage, failure of the door or lid to lock and overflowing.
How do you clean a Maytag Neptune washer?
Use high-efficiency detergent in your Neptune washing machine to keep your washer fresh-smelling and free of buildup. Turn off the washing machine, and remove any laundry from inside of it. Examine the gray-colored seal located inside the open washing machine door.
How do you drain a Maytag Neptune washer?
Unscrew the clamp holding the hose that leads from the washer tub to the pump. Pull off the hose and direct it into a 2-gallon or larger bucket to catch water that hasn’t drained. Once all the water has drained out, remove the second hose in the same way.
