Why does my X-core sprinkler not work?
Why does my X-core sprinkler not work?
If your controller shows irrigation running (Flashing Sprinkler Icon), and your sprinklers are not working, you may have a wiring problem at the valves or the irrigation water supply has been shut down. If the sprinklers do not turn on you may have a valve shut down that supplies the irrigation system.
How do I reset my Hunter X-Core irrigation controller?
Resetting a Hunter X-Core is easy. To reset the irrigation controller, all you need to do is press the negative, the hand and the program keys at the same time, then use a small tool to press in the small reset button on the side of your controller. A small screwdriver or a pen will do the trick.
How do I reset my sprinkler controller?
SRC
- Unplug the controller’s transformer.
- Press and hold down the, and buttons.
- Plug the controller’s transformer back in.
- Release the , and buttons. The display should now show 12:00am. All the memory has been cleared and the controller may now be reprogrammed.
How do you program a hunter sprinkler controller?
How to Program Your Hunter X-Core Sprinkler System
- Step 1: Set The Current Time. First, you will want to ensure that the current time is correct.
- Step 2: Set the Start Times. Next, turn the dial to “Start Times”.
- Step 3: Set the Run Time.
- Step 4: Set the Watering Days.
- Step 5: Test Coverage.
- Step 6: Finished!
How do I install the X-Core®?
Installation of the X-Core® should only be done by trained personnel. 1. Route valve wires between the control valve location and controller. 2. At valves, attach a common wire to either solenoid wire on all valves. This is most commonly a white colored wire. Attach a separate control wire to the remaining wire of each valve. All wire
How many stations can the X-Core Control?
With easy-to-configure control for up to 8 stations, including 3 programs and 4 start times each, the X-Core is the perfect solution for residential applications. Install the revolutionary Solar Sync ET sensor that regulates irrigation run times daily based on locally measured weather.
How many pages are in the X-core owners manual and programming instructions?
X-CORE Owners manual and programming instructions Hunter X-CORE Owners Manual And Programming Instructions Residential irrigation controller Hide thumbs Also See for X-CORE Owners manual and programming instructions- 372 pages Instructions- 3 pages
How do I mount my X-core controller to the wall?
Page 8: Mounting The Controller To Wall MOUNTING THE CONTROLLER TO WALL Note: The indoor version of the X-Core is not water- proof or weather-resistant, and must be installed indoors or in a protected area. 1. Secure one screw into the wall. Install screw anchors if attaching to drywall or masonry wall.
