Why has my Indesit freezer stopped working?
Why has my Indesit freezer stopped working?
Indesit fridge freezer not working This is often due to a problem with the power supply – plugs, switches, fuses, or the circuit breaker. It’s possible that there’s a blockage in the drain pan or pipes. Obstructed coils can cause poor cooling, and the condenser can result in the fridge freezer not functioning properly.
What number should Indesit fridge freezer be on?
You can adjust the thermostat to make the fridge cooler, by selecting a larger number or a thicker portion of the indicator marker. Try increasing the setting to keep the fridge cooler to prevent food going off. We recommend that you set the thermostat to setting number 3 or the mid way point of the indicator line.
How do you defrost a freezer without turning it off?
To defrost a freezer without turning it off, first remove all the items from your freezer, and pack them tightly into the fridge, being careful to shut the door properly. Then cover the floor with towels to soak up excess water that comes from the freezer during the defrosting process.
Why is the red light on my freezer?
Your freezer’s red light or high temperature alarm will turn on when it is not cold enough. This means the freezer is not be suitable for storing frozen food until the light has turned off. This means that the temperature inside your appliance is still too warm.
What is the switch for in my Indesit fridge freezer?
The appliance is fitted with a manual “Fast Freezer” switch. When loading fresh food to freeze switch “Fast Freeze” on. To set “Fast Freeze” ON, press the switch to “I” This switch activates intensive cooling to ensure that required temperatures are reached quickly.
How do you change a thermostat in a freezer?
Instructions
- Disconnect the electrical power. Unplug the freezer or shut off the circuit breaker for the freezer.
- Remove the control knob.
- Remove the grille cover.
- Remove the cold control thermostat.
- Install the new cold control thermostat.
- Reinstall the grille cover.
- Reinstall the control knob.
- Restore electrical power.
