Why is my Beko washing machine drum not turning?

Why is my Beko washing machine drum not turning?

If the drum stops spinning mid-cycle, try stopping the machine, draining the water and rearranging the laundry. Turn off your washing machine and check the drain hose and the pump filter. The hose shouldn’t be bent or clogged. Unclog or straighten it if necessary.

Why is my washing machine drum not rolling?

Do you have a blocked outlet pipe? This is possibly the most common reason a washing machine drum will fail to spin. Because when a washing machine’s outlet pipe gets blocked, the water will not drain away – preventing your cycle from starting. This will usually be accompanied by a foul smell.

Why is my Beko washing machine not spinning or draining?

The most probable cause is a clogged pump filter. The pump filter should be cleaned every three months or when it’s clogged. To clean the pump filter, open the cover to expose the filter. Some washing machine models have a small hose stuck behind the cover to drain the water inside the filter.

How do you reset a washing machine drum?

Turn the machine off at the powerpoint, wait for one minute, and then turn it back on. If you see no change, you can try a Master Reset. This will reset all of the onboard componentry and is often successfully used by appliance technicians. Open and close the door of the washing machine 6 times within 12 seconds.

How long does a Beko spin and drain take?

The spin and drain cycle only takes 12 minutes so combining the daily quick programme with the spin and drain programme only took 40 minutes and was very convenient.

What does E18 mean on a Beko washing machine?

E18. This final error code means an unbalanced washing load has been detected during a cycle, if your washing machine doesn’t spin then this can also cause the E18 error. Thankfully simply stopping the cycle, reloading and then restarting it should solve the issue.

What holds a washing machine drum in place?

The washing machine has two steel tubs. The inner tub is the one that holds the clothes. It has an agitator in the middle of it, and the sides are perforated with holes so that when the tub spins, the water can leave. The outer tub, which seals in all the water, is bolted to the body of the washer.

Why won’t my washing machine’s drum turn?

There are various possible reasons why your washing machine’s drum will no longer turn, such as a broken drive belt or a defective electronic component for example. All these various aspects must therefore be checked when trying to find the source of the issue.

What does it mean when your washing machine belt comes off?

The drive belt transfers the rotational power of the motor to the drum. If it comes off or fails completely, it can prevent the washing machine from turning properly. If you can hear the motor operating but the drum remains stationary, this means the belt has either come off or snapped.

How do I know if my washing machine drum bearings need replacing?

Try turning the drum by hand when the machine is empty. If you hear a rumbling noise or can feel ‘play’ in the drum, it’s likely that the bearings need replacing. You can also get drum spring or shock absorber problems. This usually means there’s a blockage in the drainage filter, or the pump itself has failed.

What should I do if my washing machine is not turning?

Check the condition of the door catch and replace it if necessary. The drive belt transfers the rotational power of the motor to the drum. If it comes off or fails completely, it can prevent the washing machine from turning properly.