Why is my nickel plating dull?

Why is my nickel plating dull?

One frustrating defect is a dull or hazy spot on the plating. This could have several possible causes: Chemical Imbalance: When immersing the object in a bath, insufficient levels of Dura Additive or an excessive level of sulfate, chromic acid or contaminants can lead to dull or hazy deposits in the final product.

How do you fix nickel plating?

When your nickel plating isn’t dirty enough to warrant harsher cleaning methods, apply a non-abrasive metal polish. Chrome polish works well on nickel plating. Apply a small amount of the polish to the plating, then wipe the surface in circular motions as you did while cleaning.

What are the causes of roughness in nickel plating process?

A: Roughness is usually caused by the incorporation of insoluble particles in the deposit and can come from many sources. Insoluble particles may enter the solution from many sources from the entire plating process.

What is nickel plating brightener?

Nickel Brightener The brightener is responsible for suppling the brighteners, levellers and other compounds that are used during nickel electroplating and electroforming. Nickel Brightener does not need replacing once the solution is mixed. Add more Nickel Maintenance to when brightness begins to fall.

Why does my nickel plating turns black?

The black discoloration is a passivation film that forms on EN coatings in some environments. It is a nickel/phosphorus/oxide that cannot be removed chemically. It can be removed by abrasion. It is a form of corrosion.

Why does nickel turn black?

All sulfurized anodes turn black with inorganic sulfur matter. The blackness forms faster at lower pH,higher halogen content, higher anode current density, and as a function of the sulfur contained.

Is added to nickel bath makes the deposition brighter?

Brighteners for bright nickel typically include a carrier additive, which adds sulfur to the deposit, provides ductility and gives a uniform grain structure.

Does nickel plated rust?

Poor nickel plating is far worse than no plating at all as it greatly accelerates rusting.

How do you remove black spots from nickel plating?

Suggest taking one (1) part and rubbing it down with powdered Pumice [affil. link to info/product on Amazon] , all over. Rinse well and rack in the nickel tank. If black pits occur the cleaning in your tank can be assumed to be good.

What are the common problems with nickel plating?

Nickel plating isn’t always free of problems, as every plater knows. Without warning, the electroplate can begin to show roughness or cloudiness, to say nothing of pitting, adhesion problems, dullness and misses in low-current-density areas. It’s a temptation to search for these problems in the nickel-solution chemistry.

What is the concentration of nickel plating bath?

We use a bright nickel plating bath with the concentrations below and we have pitting problem in some parts (brass). Total Ni: 85 gr/lt Boric acid: 40 g/lt Nickel chloride:59 gr/lt All the brightener concentrations are at the optimum value. Surface tension of the nickel bath solution is 31,5 dyne/cm (after the last addition).

What is brightbright decorative nickel plating?

Bright decorative nickel plating is one of the most common plating processes. Though today’s automobiles don’t feature as much nickel-chromium trim as they once did, bright work is experiencing something of a resurgence, especially on wheels and bumpers of passenger trucks.

What is the cause of pitting in bright nickel?

Q. Facing pitting in bright nickel, especially when applying a current density @25 amp/sq. ft. Component is cycle handle bar. At low current density there is no pitting problem. A. More current more tiny bubbles, more bubbles more tendency to hydrogen cling on surface.

https://www.youtube.com/watch?v=nRA8n5bOO9Y