Why is my tumble dryer not drying?
Why is my tumble dryer not drying?
Your tumble dryer might not be able to dry laundry completely if the lint filter is clogged. The lint filter gathers fluff and fibres from clothes and needs to be cleaned after every drying cycle. The lint filter is located on the rim of the door. A blocked filter drawer or condenser may cause longer drying times.
Why is my white knight tumble dryer making a noise?
This is a common fault and will be the problem, The fans are just pushed on with a small black clip providing tension to hold the fan on to the shaft, They tend to wear and just spin on the motor shaft and cause a horrid vibrating noise,(remembering to fit the big disc on the right way round before the fan, REMEMBER …
How do you reset a white knight tumble dryer?
Try the reset button on the rear of the machine. It is usually towards the top right of the machine at the rear. The button is usually red and will not make a noise when you press it. For small compact dryers, the reset button is in the centre of the machine at the rear and is a fan shaped red button.
Are white knight vented tumble dryers safe?
White Knight say one of the electrical connectors fitted to 1800 White Knight Condenser dryers (built in Oct 2010) has been discovered to be sub standard, and can potentially lead to overheating of the appliance. They are warning it could create a potential fire hazard.
Do you have manuals for your white knight dryers?
Below you can find all models White Knight Dryers for which we have manuals available. Also view the frequenty asked questions at the bottom of the page for useful tips about your product. Is your model not on the list?
What is the difference between a condenser dryer and vented dryer?
In a condenser dryer the condensed water vapour is drained and collected in an internal reservoir. In a vented dryer the hot, moist air is drained through a hose, for example out of a window. A vented dryer is cheaper to use than a condenser dryer Can I stack my dryer and washing machine? Verified
How do I use my Kenmore Elite dryer?
OPERATION Open the door. Load clothes loosely into the drum. Load sheets first, starting with one corner. Close the door. Dry your hands. Check that the timer is in the ‘0’position. Plug in the machine. Select correct heat position, (see programme chart on control panel for recommendations).
What are the dimensions of the dryer?
TECHNICAL DATA OVERALL DIMENSIONS: Height:85 cm… Remove all objects from pockets such as lighters and matches. DO NOT use a two-way adaptor, or extension lead. The dryer must be connected to its own socket.
