Why is my Whirlpool washer flashing F20?
Why is my Whirlpool washer flashing F20?
Whirlpool error code F20 appears when no water is detected entering the machine or if the pressure switch trip is not detected. The pressure switch is the part of the machine that monitors high water pressure. The washing machine automatically cancels the wash cycle during an F20 error.
How do you reset error F21?
Reset. When the “F21” error code appears, try pressing “Pause/Cancel” to stop the current wash cycle. If water remains in the washing machine tub, touch “Drain/Spin” to force a secondary drain cycle to remove the water. Once all the water drains, try selecting a new wash cycle and pushing “Start.”
Do Whirlpool washers have a reset button?
Method 1: Unplug it The first way you can reset whirlpool washer top load is by unplugging it for about 2 minutes then plug it back in and wait about 30 seconds before starting the washer again. This performs a hard reset on the machine and it will start over after you reconnect it again.
What does the error F20 mean on a whirlpool washing machine?
The error F20 code appears when there is a water supply problem. Water supply problems occur when there are faulty components, clogs, or dirty filters. To fix a faulty clog, you’ll need to diagnose the issue, replace dirty filters, and remove any kinks from hoses.
Why does my Whirlpool duet washing machine turn off the water?
Whirlpool Duet washing machines allow six minutes before the unit cuts the water supply. The purpose of the pressure switch is to prevent the unit from overflowing. However, in some cases, it can be triggered accidentally.
What does it mean when your washing machine stops working?
This means no water is flowing into the machine and cancels the cycle. This is likely due to faulty components or dirty filters, meaning you will need to replace either the clog or connectors. If you’re worried that there may be a more complex issue going on, don’t worry.
