Does ABEC matter for skateboard bearings?
Does ABEC matter for skateboard bearings?
“The precision or the ABEC of the bearing doesn’t really matter because skateboarding is a non-precision application,” he says. There are really four different components to a bearing: the balls, the inner and outer raceways, the retainer, and the seal or shield that goes on the bearing.
Are ABEC 7 bearings good?
The bearings are nothing to get really excited about but they will do for a while. ABEC 7 may sound nice but it really doesn’t matter, the ABEC rating doesn’t really say anything about the quality but is about how much RPM they can handle. You’ll notice you need to push the board hard to get a good amount of speed.
Are abec 3 bearings fast?
ABEC 3 bearings work for most skateboarding, but won’t roll very smoothly or fast. ABEC 5 bearings are the norm in skateboarding. You get a reasonable amount of speed, and at a reasonable cost. ABEC 7 bearings would be very fast and smooth, but very expensive.
Do you need spacers in skateboard wheels?
Bearing spacers are totally optional; longboarders and casual skaters likely won’t put enough pressure on their boards to ever need them, though they are definitely a good investment if you want to slide, do a lot of tricks, and generally skate hard. Unlike bearings, bearing spacers are not one-size-fits-all.
Can you skate without spacers?
What are the different types of skateboard bearings?
Types of Loads. There are two main types of bearings: thrust bearings, which keep a round item spinning and in position while thrust is applied (a lazy susan, for example), and radial load bearings, which keep a spinning item in position in the radial direction (skateboard bearings, for example).
Are ABEC 9 bearings good?
The NordiK Abec 9 bearings are a great Abec 9 bearing at an amazing price. These skateboard / longboard Abec 9 bearings are engineered to handle high speeds, and last a long time; they are a great all around bearing. These skateboard / longboard Abec 9 bearings have shields on both sides of the bearings which offer better protection from debris.
What are the dimensions of a skateboard bearing?
Each skateboard wheel is mounted on its axle via two bearings. With few exceptions, the bearings are the industrial standard “608” size, with a bore of 8 mm (or 10mm depending on the axle), an outer diameter of 22 mm, and a width of 7 mm.
What is a skateboard bearing?
Skateboard bearings are the round metal pieces that fit inside the wheels to mount the wheels to the axle. Regardless of wheel size, all skateboard bearings are the same size and will fit any skateboard wheel that Warehouse Skateboards sells. The universal measurements for bearings are 8mm (core), 22mm (outer diameter), and 7mm (width).
