What is a cable railing system?
What is a cable railing system?
Cable railings (also known as cable railing systems and wire rope railings) are a low maintenance alternative to traditional wood or metal railings. Quite simply, they are guard rails and hand rails that use horizontal cables in place of traditional spindles, glass, mesh, etc. for infill.
How far apart can cable railing posts be?
4-feet apart
Spacing the posts properly Unless homeowners are using additional support, posts should be no further than 4-feet apart. This is done to ensure cables do not deflect or bow under cable tension loads. By placing posts 4-feet apart homeowners ensure their cables will still meet the 4-inch sphere rule.
Is cable railing legal in Canada?
Horizontal railing installations, like cable railing, are a safe option for guardrails and are approved by the National Building Code (NBC) 2015. Earlier this year, Prince Edward Island became the latest province to adopt the changes pertaining to guard requirements made in the 2015 National Building Code (NBC).
Are cables wires?
Cable. While the terms wire and cable are often used interchangeably, a wire is one electrical conductor and cable is multiple conductors, or a group of wires, encased in sheathing. Electric wires are typically made of aluminum or copper. The group of wires is then encased in an outer sheath to make up the single cable …
How to install cable railing?
Make a hole-drilling template by drilling ¼-inch-diameter holes spaced 3 inches apart through a 4-inch-wide by…
What are the components of a cable handrail system?
All of the fittings are either electro-polished or passivated for superior surface finishing. Cable rail systems typically consist of cable, termination fittings and tensioning fittings such as turnbuckles or threaded studs.
How far apart are posts for cable railing?
Our standard recommendation / specification is 4 foot post spacing, but you can go up to 7 feet if using a Cable Stabilizer in the middle to maintain cable spacing. The farther apart your posts are spaced, the more cable deflection will occur and this can cause unsafe conditions. Never attempt to use a cable stabilizer on rail sections over 7 feet.
How do you install stair railing?
To install a stair railing, attach a half- Newel post to the wall with toggle bolts, secure a Newel post to each of the top and bottom stairs with lag bolts, measure the railing, and cut it to size. To complete the railing, install the balusters, and then fit the railing on top.
