Can I use radio antenna for Wi-Fi?
Can I use radio antenna for Wi-Fi?
The single most important thing you can do to extend the range of your 802.11 system is to install an external antenna with some good gain and directional or omni-directional qualities. WiFi is simply a radio, which is used for computer. Get a bigger antenna; your WiFi will go a lot further.
Can I use dish antenna for Wi-Fi?
Turning a satellite dish into a Wi-Fi antenna can be both economical and efficient, because there is no signal loss using USB cable connections as compared to coaxial cable. The result is far stronger signal strength and range in connecting to Wi-Fi hot spots and public access points.
How far can a Cantenna reach?
Capable of reaching up to 1 mile under ideal circumstances, this WiFi antenna can increase the range of your device by up to 3-4 times the default settings. DUAL-BAND INDOOR ANTENNA: The Yagi Cantenna Dual-Band Wifi Extender signal booster is ideal for indoor placement in any home, office, RV or boat .
What is the range of a WiFi antenna?
A typical wireless router in an indoor point-to-multipoint arrangement using 802.11n and a stock antenna might have a range of 50 metres (160 ft) or less. Outdoor point-to-point arrangements, through use of directional antennas, can be extended with many kilometers (miles) between stations.
How do I connect my cantenna to my wireless card?
To use your cantenna, you’ll need a special cable commonly called a “Pig Tail”. The pig tail connects your wireless card or access point to you antenna. One end of the cable will have a “N” Male connector (just right for connecting your your cantenna), while the other end will have a connector appropriate to your card or access point.
How to install an antenna in a can?
When you’ve got your wire correctly sized, solder it into the connector keeping it as straight and upright as you can. When it’s cooled, bolt or screw the assembly into your can. Put the heads of the bolts inside the can and the nuts on the outside to minimize the obstructions in your antenna.
How to install a cantenna?
Put the heads of the bolts inside the can and the nuts on the outside to minimize the obstructions in your antenna. Your Done! To use your cantenna, you’ll need a special cable commonly called a “Pig Tail”. The pig tail connects your wireless card or access point to you antenna.
Where can I buy a pigtail antenna for my TV?
Fleeman Anderson & Bird has a “cantenna kit” for sale that includes the connector and pigtail. Choose one of the “cables” links from the menu and look towards the bottom of the list. Hook up your cable, point the antenna at a friend’s, and see how far you can stretch you network.
