How do I access ACEManager?
How do I access ACEManager?
Launch an internet browser and type 192.168. 13.31:9191 into the search bar and hit enter. The ACEmanager login should appear if the connection was successful. Internet Explorer, Firefox, and Chrome are all compatible.
How do I connect to Sierra Wireless?
Click the “Connect” button, then enter the network access information from your wireless network provider in the appropriate fields. For example, enter your username, password and IP address from the network provider, if applicable. The Aircard then automatically connects your computer to the Internet.
What is ACEManager?
ACEManager is a configuration and diagnostic tool for the Sierra Wireless AirLink Raven modems.
How do I factory reset my Sierra Wireless rv50?
Press and hold the reset button for 7-10 seconds until the Power LED turn red. This will indicate a user-initiated hardware factory reset. Press and hold the reset button for 7-10 seconds until all four LEDs turn red. This will indicate a user-initiated hardware factory reset.
How do I connect my AirLink rv50?
Setup Steps
- Configure default Ethernet connection.
- Update the firmware.
- Set up the AirLink to be on a network.
- Disable ACEManager “Over-The-Air”
- Configure SSH Interface.
- Configure SMS settings.
- Configure Port Filtering and Outbound Ports.
- (Optional) Set trusted inbound and outbound IP addresses.
How do you put a SIM card in a Sierra Wireless?
Insert SIM & memory card
- Remove the Back panel of the device by pressing on the cover and sliding away from the device.
- Insert the SIM card into the SIM card tray, with the text and images on the card facing up.
- Insert the Memory card into the SD card tray, with the text and images on the card facing up.
What does Sierra Wireless do?
Sierra Wireless sells mobile computing and machine-to-machine (M2M) communications products that work over cellular networks. Sierra Wireless sells 2G, 3G, 4G and 5G mobile broadband wireless modems, routers and gateways as well as software, tools, and services.
How do I reset my GX450?
GX450 Factory Reset Button (Restore Defaults) With the device powered on, holding the Reset button down for 7–10 seconds to resets the GX Series gateway to its factory default settings. Momentarily press and release the button to reboot the GX Series gateway.
What is a 2FF SIM card?
What is a Standard 2FF SIM Card? Today’s standard SIM is the second SIM form factor (2FF). Also known as a Mini SIM, measuring around 25mm long by 15mm wide it is the largest available SIM form factor. It is typically used for large IoT/M2M devices, such as vehicles.
Where does Sierra Wireless manufacture?
Richmond, British Columbia, Canada
Sierra Wireless is a Canadian multinational wireless communications equipment designer and manufacturer headquartered in Richmond, British Columbia, Canada….Sierra Wireless.
| Type | Public |
|---|---|
| Founded | Richmond, British Columbia (1993) |
| Headquarters | Richmond, British Columbia, Canada (global) Atlanta, United States (corporate) |
Where is Sierra Wireless headquarters?
Richmond, Canada
Sierra Wireless/Headquarters
What is 2FF and 3FF SIM?
Mini SIM (= 2FF): 25 x 15 mm. This used to be the standard for many years from 1996 and still is the most common size around. Micro SIM (= 3FF): 15 x 12 mm. Beginning with iPad and the iPhone 4 in 2010, this smaller size was introduced and more and more new devices are using it now.
How do I connect my modem to the Sierra Wireless acemanager?
This can be accomplished by connecting remotely or directly to the modem and using the Sierra Wireless ACEmanager utility. Use a remote connection if the static IP address of the modem is known and it successfully connects to the network.
Can I Use my Sierra Wireless Airlink modem with a vehicle?
Sierra Wireless AirLink your modem may be used at this time. The driver or operator of any vehicle should not operate the Sierra Wireless AirLink your modem while in control of a vehicle. Doing so will detract from the driver or operatorʹs control and operation of that vehicle.
How do I connect Airlink to acemanager?
Start AceManager: Start > All Programs > AirLink Communica-tions > AceManager Click the Connect button. Serial : Select PPP,COM1 and enter 12345 for the password and then click OK. Ethernet : Select TCP, enter the IP address of the modem (local default IP address is 192.168.13.31).
What happened to the acemanager software?
The AceManager software has been deprecated and Sierra Wireless is no longer providing updates to it. You can make configuration changes using the AceManager GUI instead. To access this GUI, connect a PC to the Raven X via Ethernet and navigate to 192.168.13.31:9191 on a web browser. Internet Explorer is preferred.
