What does F02 mean on a Whirlpool dryer?
What does F02 mean on a Whirlpool dryer?
The F02 error means the dryer user interface keypad has a stuck key or the user interface board has failed. You can try to reset the user interface board by unplugging the dryer or turning off the breaker supplying voltage to the dryer at the breaker panel in your home.
Why does my washing machine say F2?
: The “F2” fault code indicates it’s taking too long to drain the tub of water in order to reset the pressure switch. The problem is that the washer is not always able to drain water so that the water level switch can reset. This can happen if the wrong type of detergent is used or if you are using too much.
What is error code E2 on Whirlpool washer?
Does the display show the error code F05 or E2? This means there’s something wrong with the water temperature sensor. Time to reset the Whirlpool. Switch off the washing machine and remove the connector for 30 minutes.
How do I fix error code F02?
Press the pause or cancel button on the Whirlpool washing machine to clear the F02 error code from the display, and try using it again. The error code is displayed when the washer takes more than eight minutes to drain, but may just be a glitch.
How do I fix APC F02 error?
BACK UPS pro 1500 error ode f02 after shutdown for the night,…
- just power off your APC.
- just remove the power cord from sector, keep battery.
- press constantly power button until you hear the second beep signal.
- Let the apc restart, it will mark f02 error again.
- plug the power cord.
- restart the APC.
What does OB mean on Whirlpool washer?
The OB error is an out of balance error. The OB error comes up when the motor controller detects an unrecoverable out of balance condition. Open the lid and redistribute the load and try again. The. lid must be open after this error appears before the washer will continue the cycle.
How do you reset a Whirlpool front load washer?
Rotate your dial until you have the following three lights illuminated: RINSE, WASH, and STOP. Then turn off your washer and unplug it for ten seconds. When you turn it back on it should be reset.
What does the error code F02 mean?
In short, the error f02 means that the circuit in the tachometer is broken, as a result of which the electric motor does not work. It appears like this: you put the laundry in the drum, turn on the washing machine, it draws water, several times tries to spin the drum, but nothing comes out, it stands still.
What is a F20 error on a whirlpool washing machine?
F20 Error Code. Whirlpool error code F20 appears when no water is detected entering the machine or if the pressure switch trip is not detected. The pressure switch is the part of the machine that monitors high water pressure. The washing machine automatically cancels the wash cycle during an F20 error.
What are the error codes for a whirlpool washer?
A: Error codes for a washing machine, such as the Whirlpool Duet front loading automatic unit, can contain a F followed by two digits like F07, F09 and F10.
What are the Whirlpool duet washer error codes?
Some of the error codes that appear on a Whirlpool Duet include error code “F/H,” which means there is no water detected; error code “F/02,” which means draining takes more than 8 minutes; and error code “F/05,” which means there’s an error in the water temperature sensor.
