How long does Alexseal paint last?
How long does Alexseal paint last?
Classified as non-leaching, Coppercoat bottom paint is a hard-wearing, long-lasting (up to 10 years according to the manufacturer), and comparatively eco-friendly. If you’re like many owners of an older boat in this economy, you’ve decided to keep it a little longer instead of risking selling it at a loss.
How much does Alexseal paint cost?
PLEASE NOTE: FOR PROFESSIONAL USE ONLY
| Description | Item | Price |
|---|---|---|
| ALEXSEAL TOPCOAT QT CLEAR GLOSS | ALS-T0125Q | $68.19 |
| ALEXSEAL TOPCOAT GAL CREAM | ALS-T1150G | $208.99 |
| ALEXSEAL TOPCOAT QT CREAM | ALS-T1150Q | $76.59 |
| ALEXSEAL TOPCOAT QT CAMEL BEIGE | ALS-T1151Q | $89.99 |
What type of paint is Alexseal?
Superior Marine Paint Products ALEXSEAL® Yacht Coatings offers a complete system of premium paint products comprised of the highest quality pigments, solvents, aliphatic urethane resins, ultraviolet resistors and agents to create the most advanced marine topcoats available.
How do you apply Alexseal paint?
It is recommended that the ALEXSEAL ® Topcoat be applied within 4 days (2 days if outside) after sanding to ensure adhesion. 2. Apply 2 – 3 coats to a wet film thickness (WFT) of 2 – 3 mils (50 – 75 microns) per coat. Allow 20 – 60 minutes tack up between coats.
Can you buff Alexseal?
Machine buff the blended area to restore the gloss. Any buffing must be done by an experienced applicator by hand or slow speed buffing machine using compound/polish and a pad recommended by the product’s manufacturer.
How much Alexseal do I need?
Apply 2-3 coats of ALEXSEAL ® Premium Topcoat 501 Clear in order to seal the Metallic Base Coat. To achieve a higher level of gloss and a more durable finish, a second application of 2 – 3 coats of ALEXSEAL ® Premium Topcoat 501 Clear Gloss may be needed.
What type of paint is awlgrip?
Awlcraft 2000 is an Awlgrip paint that is a 3 component, premium polyurethane finish that must be applied by spray only, and delivers a high gloss finish in a wide range of colors with enhanced color and gloss retention.
How do you apply Alexseal primer?
Procedure For Application of ALEXSEAL ® Finish Primer 442 1. Apply 2 or 3 coats to a wet film thickness (WFT) of 100 – 220 microns (4 – 8 mils) per coat. Maximum recommended film thickness during a spray application is 3 coats totaling 300 microns (12 mils) WFT, or 100 microns (4 mils) DFT.
How to properly apply alexseal?
Alexseal is pretty much idiot proof: p220 your primer and roll on a decent coat of the topcoat with 30% brushing solvent. p320 this and go again with another topcoat. Lastly and optionally P400 or scotchbrite and then a clearcoat. Tipping is not only not necessary but can actually interfere with its self levelling properties.
Can alexseal LP paint be repaired?
However, Alexseal also claims it can be repaired, which is nearly impossible for Awlgrip. When these LP paints cure, a micoscopic thin clear layer rises to the top, which provides protection and gloss.
Can alexseal paint be used on awlgrip?
Not sure that matters, if you’re paying a pro. However, Alexseal also claims it can be repaired, which is nearly impossible for Awlgrip. When these LP paints cure, a micoscopic thin clear layer rises to the top, which provides protection and gloss. This layer is hard to feather in a repair.
What is the difference between alexseal and LPU paint?
While Alexseal is an LPU it uses a different resin formulation that results in the pigment and “hard shell” of an LPU being the entire thickness of the paint, which is similar to an acrylic urethane only harder. Our boat is Awlcraft 2000 and it is easily repairable but not a tough as Alexseal.
