Where do I connect the amp remote wire?
Where do I connect the amp remote wire?
Some of the more common options for connecting the remote turn on wire when using a factory head unit are to the wire connected to a power antenna (older vehicles which do not turn off the antenna when not using the radio) or to the vehicle’s fuse box.
How do I connect my Samsung TV to my amplifier?
Method 1. Connect with an HDMI cable
- Prepare an HDMI cable.
- Connect the cable to the TV’s HDMI IN (ARC).
- Connect to the HDMI OUT (TV-ARC) port of the soundbar.
- Turn on the soundbar and set the Source to D.IN.
- The TV sound will be played through your soundbar.
Do you need a remote wire for AMP?
Amplifiers do not have to use the remote off of your deck. You can use any suitable power source. The only thing you want to make sure is that you find a source the turns off with your key otherwise you may end up draining the battery.
How do I connect my Samsung soundbar to my amplifier?
You can connect the soundbar to a receiver by an optical cable. Connect one end to the digital optical out port on the receiver, and to the optical in port on the soundbar. The receiver will, of course, need a digital optical out port.
Is power antenna the same as remote?
Almost every aftermarket head unit has a remote turn on wire. Some manufacturers call it a power antenna wire. But regardless of the label all it does is output a positive 12 volts when the head unit is turned on. It should be noted that some head units have both a remote turn on wire and a power antenna wire.
How do you connect an amplifier to a TV?
Connect a Coaxial Digital Cable, Optical Digital Cable, or Audio cable to the Audio Output jack on your TV. Connect the other end of the cable to the corresponding jacks on the A/V receiver or home theater system. Depending on your device, the audio input may be labeled TV INPUT or VIDEO INPUT.
How do I connect my amp to my TV without HDMI?
All you need are outputs from a television that can allow for the use of legacy RCA analog cables or digital cables. These types of cables then are fed into the input jacks on modern receivers that can accept them. Using analog or digital cables from a smart TV into a receiver offers users an alternative to HDMI.
Can you connect a soundbar to an amplifier?
You can technically connect a soundbar to an amplifier, but it doesn’t make a lot of sense since the amplifier is already built-in. Most soundbars are all-in-one home theatre setups that are meant to provide everything you need in one package.
Is the power antenna wire the remote wire?
How do you wire a remote switch to an amplifier?
We recommend wrapping all butt connector connections in electrical tape or heat shrink. Another option for providing a proper remote turn on circuit is to wire constant power and ground to a switch and then wire the output of the switch to the amplifier’s remote turn on.
How do I connect my Samsung TV to my cable box?
Make sure the TV and cable or satellite box are turned off. Connect an HDMI cable to your cable or satellite box’s HDMI out port, which should be located on the back. Connect the other end of the HDMI cable to any of the empty HDMI ports on your Samsung TV.
How do I connect my Sony TV to my soundbar?
Connect the digital audio (optical) cable to the OPTICAL IN port on your soundbar, speaker, or surround sound system, and the other end into the DIGITAL AUDIO OUT port on the TV. Using the TV remote, navigate to Settings.
How do I connect my Philips TV to an external speaker?
Insert the digital optical audio cable into the DIGITAL AUDIO OUT port of the TV. Step 2. Insert the other end of the digital optical cable into the DIGITAL AUDIO IN port of your external speaker. Step 3. Press the Home button on the remote control and select Settings.
