What is the proper shipping name for a material?
What is the proper shipping name for a material?
Proper shipping name is the standard technical name to describe the hazard properties and the composition of dangerous goods. You need to choose a UN number (usually, 4 digits) and a proper shipping name from Dangerous Goods List that can most accurately describe your dangerous goods.
What hazard class is dry ice?
Class 9
Dry ice is classified by DOT and IATA as a “miscellaneous” hazard, Class 9. Dry ice is considered hazardous during transportation for the following reasons: Explosion hazard: Dry ice releases a large volume of carbon dioxide gas as it sublimates.
Is shipping dry ice HazMat?
Both the Department of Transportation (DOT) and the International Civil Aviation Organization and the Federal Aviation Administration (ICAO/ FAA) regulate shipments of dry ice as it is considered a hazardous material because of the potential for asphyxiation.
How do you classify dry ice according to composition?
Dry ice is the solid form of carbon dioxide (CO2), a molecule consisting of a single carbon atom bonded to two oxygen atoms. Dry ice is colorless, odorless, and non-flammable, and can lower the pH of a solution when dissolved in water, forming carbonic acid (H2CO3).
How do I find the correct shipping name?
To select a proper shipping name, refer to column 2 of the hazardous materials table at 49 CFR 172.101 and look for a shipping name that most specifically corresponds to the material to be shipped.
How do I choose a shipping name?
Proper shipping names should be selected in the following order:
- The chemical identity of the hazardous material: its technical name.
- The name of a category or group of chemicals, e.g. “Alcohols, n.o.s.”
- The intended use of the material, e.g. “Resin Solution”.
Do you need IATA training to ship dry ice?
Many industries use dry ice (UN 1845 “Carbon dioxide, solid”) to ship temperature sensitive materials….Online Course Details.
| Course code | HMT 240 |
|---|---|
| Access time | 90 days |
| Certificate issued | Yes |
| Training required by | US DOT, ICAO/IATA, and IMO/IMDG (49 CFR 172.704, IATA 1.5, and IMDG 1.3.1) |
What is a hazmat label?
Hazard Class Labels are standard hazmat identifiers, designed to meet regulations. Each label has markings that tell what type of hazard is identified on the label. They help identify what type of hazardous material is in a package.
What is the proper shipping name for dry ice?
Dry Ice (or Carbon Dioxide Solid)Note: The Proper Shipping Name, namely Dry Ice (or Carbon Dioxide Solid) must be on the same surface of the package as the hazard label or Class 9 label, when package dimensions are adequate. UN 1845 The net quantity of dry ice in the package or overpack, in kilograms (1 kg = 2 lb). Dry Ice Job Aid – 2021
What is the marking requirement for dry ice in part 172?
(1) In addition to the applicable marking requirements in subpart D of part 172, the net mass of the carbon dioxide, solid (dry ice) must be marked on the outside of the package. This provision also applies to unit load devices (ULDs) when the ULD contains dry ice and is considered the packaging .
What happens if you put dry ice in the package?
Dry ice releases carbon dioxide gas which can build up enough pressure to rupture the packaging. You must ensure the packaging you use allows the release of this pressure to prevent rupturing the package. For example, do not use steel drums or jerricans as outer packaging, and do not place dry ice within sealed plastic bags.
Do I need a class 9 label for dry ice?
A Class 9 label is required. Do NOT write inside the diamond border of the label. The label may be attached to the package by means of a strong tag. Special FedEx Express Dry Ice labels are available free of charge by calling 1.800.GoFedEx 1.800.463.3339. These labels greatly simplify the marking and labeling process.
