What is Sea-Doo MPEM?

What is Sea-Doo MPEM?

the MPEM IS the ignition module. it does spark, rev limit, spark advance. it also does the anti-theft. and adds in guages and misc stuff.

Can I program my own Dess key?

Since DESS keys are so specialized, you will need a Sea-Doo dealer or a repair shop to help you program your key. This requires your personal watercraft to be at the shop. If you own a diagnostic tool, you can program your key at home.

How much does it cost to program a SeaDoo key?

A new Sea-Doo key will cost about $70 for the key plus $0 to $100 to program the key. Every jet ski dealership is different, some don’t charge to program the key if you buy the key from them. Some dealers charge a “few bucks” and some charge a lot more than a “few bucks” to program the key.

What does non Dess mean?

SeaDoo sparks use a non DESS Key. This has the same appearance as a DESS Key but does not have the RF chip inside, only the magnet to activate the kill switch. Any key or even a magnet on the post can active a SeaDoo Spark.

How do you test MPEM?

To perform this test you will need to unplug all the connectors from the MPEM and then remove the MPEM. Insert a known good 5A fuse into the appropriate 5A slot on the MPEM. All Plug-in MPEM’s are powered via two spade terminals, one positive and one negative.

Where is MPEM?

The GRAY electrical box is on the left side, toward the front. Pull the bucket out of the hood, and you will see it. Your MPEM, and CDI is in there.

How long does it take to program a Dess key?

they already made there money on the sale of the Dess cord. It only takes the right programmer 5-10 minutes at best to do it.

How do you test a SeaDoo MPEM?

Do SeaDoo keys have to be programmed?

Unlike standard metal keys, your Sea-Doo key must be specifically programmed for your PWC. They basically work just like a lot of “push-to-start” cars. For security purposes, only the right key will be able to start your Sea-Doo.

Are SeaDoo keys interchangeable?

Most Sea Doo watercraft can have up to 8 different keys assigned to them at once. Owners with several watercraft often take advantage of this by making their keys cross-compatible for all of their machines.

How do I bypass Dess post Seadoo?

The DESS system was designed as an anti theft device. If your not getting the two beeps, check the buzzer with a test light or get a buzzer from Radio Shack. Push the start/stop button 5 times, without the lanyard on the post. You should get one long and one short beep.

What is Mpem Dess programming?

MPEM Dess Programming: We also own a programmer and have made harnesses to program ANY (boat OR PWC) MPEM without needing the machine. That means you ship your MPEM and we test, DESS key program, or program multiple MPEM’s to the same key, check info and hours, and set the timing setting on all 787s, and more.

Can I get a price for my Mpem?

MPEM Pricing: Unfortunately due to fluctuations in availability of MPEMs, MPEM parts and options, we can not list a price for each MPEM. Please call Nick or Jess to get your specific SeaDoo MPEM price. MPEM Bench testing: Many shops and dealers blame the MPEM and try to sell you a new one or expensive part.

How much does it cost to program a Sea Doo Mpem?

We program ANY 2-Stroke or 4-Stroke 4TEC Sea Doo MPEM including GTX, GTI, XP, ECM, ECU, RFI, DI and more! We write down the hours stored, serial numbers and engine timing for reference. All work is fully guaranteed. 2-Stroke Dess Key Program Rates. $35 plus shipping to program the first MPEM.

Can You program multiple Mpem’s to the same key?

That means you ship your MPEM and we test, DESS key program, or program multiple MPEM’s to the same key, check info and hours, and set the timing setting on all 787s, and more. MPEM Pricing: Unfortunately due to fluctuations in availability of MPEMs, MPEM parts and options, we can not list a price for each MPEM.