What is a bound neck on a guitar?

What is a bound neck on a guitar?

For those that don’t like to feel the ends of the frets when moving up and down the guitar neck, a bound neck is an option that can offer a smoother trip up and down the fingerboard (a.k.a. fretboard). Binding is the practice of taking a strip of material—typically vinyl—to line the outside of the fretboard.

What is the benefit of neck binding?

Fretboard binding has the added bonus of preventing or at least hiding the edges of frets from sticking out and making fretting uncomfortable. Sometimes frets are poorly installed or more likely the fretboard wood shrinks slightly as it dries out which can make the frets stick out.

What does binding do on a guitar?

Binding on acoustic guitars serve to protect the edges of the wood from impact and, particularly where end grain would be exposed, moisture damage. After the back, front and sides are joined a small ledge is cut out on the edge which is then inlaid before finishing the guitar.

Can Binding be added to a guitar?

Some guitars look like they could use binding, but just wouldn’t be worth the expense of adding it. It’s a nice looking guitar with a very tastefully done ‘honeyburst’ and matte top finish.

Does binding affect tone?

Lastly, the addition of the binding really does enhance the overall tone and projection of the guitar. This enables the complex curves and angles of the guitar to be accommodated for when cutting the rabbit.

When did fender introduce 9.5 radius?

1980s
Most prevalent is the modern 9.5” radius (241mm), which was adopted in the 1980s and is now found on about two thirds of Fender electric instruments. The next most common fingerboard radius, 7.25” (184mm), is a vintage-era spec now used on just under a third of Fender electric instruments.

What’s the purpose of binding?

Binding is a strip of material that you put round the edge of a piece of cloth or other object in order to protect or decorate it.

What is the neck of a guitar called?

The top of the guitar is called the headstock, so logically the thing that connects the body to the head would be the neck. A human neck is short, but necks can be long.

What is a guitar neck profile?

Guitar Neck Profiles. The Neck Profile is the coutour or grip shape of the neck, and is important for optimum playability and hand comfort. To determine which works best for you compare the dimensions below (measured from the face of the fretboard to the back of the neck) to those of your favorite neck.

What is a guitar binding?

Binding is a narrow outer strip of material on the edges of the body of stringed instruments such as lutes, mandolins, guitars and ukuleles. Binding may be made of thin wood strips. It is applied along the entire edge of top and back plates.

What is neck binding?

Binding, for both bodies and necks, is primarily to provide sacrificial material for minor dings and dents, which is why it’s placed on edges and occasionally on the sides of fretboards . Fretboard binding has the added bonus of preventing or at least hiding the edges of frets from sticking out and making fretting uncomfortable.