What is the code for water heaters?
What is the code for water heaters?
Residential water heaters are regulated under California’s Title 20 Appliance Efficiency Regulations, Section 1605.1(f). These regulations align with the federal efficiency standards for residential water heaters.
Is PVC allowed in California?
[OSHPD 1, 2, 3 & 4] ABS and PVC installations are not allowed.
Is a water heater drip pan required in California?
Drain-Pan shall be required when a water heater and/or tank is installed in a location where it could cause damage; in case of failure/leak to floor, sub-floor, drywall.
Are expansion tanks required on water heaters in California?
The California Plumbing Code (Section 608.3) and the California Mechanical Code (Section 1005.0) requires a thermal expansion tank, or listed equivalent, to be installed to water heating systems to relieve excessive building pressure during the heating process.
Do water heaters need to be double strapped in California?
The State of California requires that all water heaters must be strapped to resist motion during an earthquake. All water heaters must be strapped in at least two locations; the upper one-third of the unit and the lower one-third. The lower strap must be a minimum of 4″ above the water heater control unit.
Is PEX allowed in California?
PEX was banned in California due to some concerns about toxic materials leaking through the pipe and into water. Through various national laboratory tests, PEX has proven to be completely safe and durable. It is now legal in California and even included in principal plumbing codes.
Are water heaters required to be double strapped in California?
Can I install my own water heater in California?
By law, the state of California and most likely your city/county requires a permit and a final inspection for a water heater replacement. Every permit issued must be inspected before its expiration date to avoid penalties and/or fees from the cities/counties. submit an application for your permit.
