How do you lower the spare tire on a 2010 Silverado?
How do you lower the spare tire on a 2010 Silverado?
Position your jack on top of the 2 wheel blocks with backs facing each other. Rotate the handle to raise the jack until the tire stops raising back in to its recess. Wiggle the wheel as you lower the jack carefully to release the wheel from the secondary latch.
How can I get my Chevy spare down without tools?
Method One
- Step #1: Get Under the Truck.
- Step #2: Locate and Pull off the Guide Tube.
- Step #3: Put a Wedge Between the Tire and the Vehicle.
- Step #4: Use Pliers to Pull off the Key.
- Step #5: Lower the Tire to the Ground.
- Step #1: Fix the Socket to the Extender.
- Step #2: Pass the Socket Through the Back Bumper.
How do you take the spare tire off a Silverado without a tool?
Removing a spare tire without the factory tool is easy when you follow these steps:
- Get under the truck.
- Pull off the guide tube.
- Pull out the key with pliers.
- Insert crank into the new hole.
- Turn the crank counterclockwise to lower the tire.
How do you get the spare tire off a Chevy Silverado without a tool?
Where do I put the jack on my Silverado?
The location of your jack depends on the type of car you have; on a Chevy Silverado, the jack is often located under the passenger seat on the driver’s side of the vehicle. The base of the jack is held in place by a bracket that is inserted into a hole in the floor and sits on a plate.
How to fix a flat tire on a Chevy Silverado 1500?
Tires & Wheels / Change a Flat Tire Fix a Flat Tire: Chevrolet Silverado 1500 (2007-2013) 1. Getting Started – Prepare for the repair 2. Find Jack Kit – Locate all of the components for your jack kit 3. Access Spare – Locate and remove the spare tire 4. Pre-Jack List – Things to do before jacking up vehicle 5.
How to change a flat tire properly?
Whatever the case, it is a good thing to know how to change your tire appropriately. Before you can actually change out the flat tire, you’ll need to secure the vehicle safely. Pull over to the side of the road. Turn the hazard lights or light flares on. Ensure the road is leveled and flat. Pull up or depress the e-brake.
How to check the oil level in a 2013 Chevy Silverado GMT900?
This article applies to the Chevrolet Silverado GMT900 (2007-2013). The dipstick for your truck slides into the dipstick tube and then into the oil pan. There is no other way to easily check the oil level in your truck except with the dipstick tube. The tube goes into the block, down where road salt and crud gets on it.
