Are Sloan and Zurn parts interchangeable?
Are Sloan and Zurn parts interchangeable?
Zurn manufactures superior replacement parts and sensor upgrade kits that fit on Sloan® and Zurn valve bodies. All Zurn GO BLUE parts are interchangeable with Sloan Regal®/ Royal® Flush Valves.
What causes a Sloan flush valve to keep running?
Flushometer Continuously Runs/ Valve Will Not Shut Off This occurs when a control stop does not open all the way when the unit is flushed, which then causes the water pressure to not be high enough for the diaphragm to function properly and reset. This causes water to continuously run into the unit.
Are Sloan diaphragms interchangeable?
A: In general the bodies of these flushometers are identical and the parts for each are interchangeable. The webinar identified the similarities and differences between Regal, Sloan and Royal but if you have additional questions please contact Sloan Tech Support.
How do you use Zurn magic magnet?
Place the Zurn “Magic Magnet” (N) on the left hand side of the flat top surface of the valve and move around until the LED comes on. 2. The LED will blink 10 times to indicate magnet is in the proper position. Hold magnet in place until 10 flashing lights occur and the red light turns solid.
What are the types of flush valves?
Two distinct types of Sloan flush valves exist: diaphragm flush valves and piston flush valves. Though each of these valve types functions in a similar manner, the design of the flush valves and the materials used in their construction differs.
What are the different types of toilet flush valves?
The two most common toilet flush valves used on toilets that make use of a tank or cistern are the flapper type toilet flush valve (illustrated just below) and the tank ball type toilet flush valve (illustrated further below). Flapper type toilet flush valve:…
What is a flush valve assembly?
The toilet’s flush valve assembly is most often the center of any leaking in the toilet’s tank. It has moving parts that seal and drain, so as such is prone to be highly affected by corrosion or deterioration. The flush valve assembly consists of the Overflow Tube, Seat, Flapper Valve, and the Sponge Gasket.
What is flush valve in toilet?
A flush valve is a mechanism used to flush a toilet or urinal. The valve and associated hardware are located within the toilet tank or in the body of the urinal. Most toilets have a lever or push button activator, which is used to operate the flush valve.
