Can you run a tunnel ram on the street?
Can you run a tunnel ram on the street?
The rpm at peak torque may rise, but typically, the torque at the old rpm point will still be higher than it was. This isn’t to say that any tunnel-ram is great on the street. Long runners make torque; short runners make high-end power.
What is a tunnel ram intake manifold?
Tunnel Rams. Wiktionary describes a tunnel ram as ‘A type of high-performance intake manifold designed to straighten the pathway of fuel/air mixture, speeding the flow to the combustion chamber’. Faster flow means more fuel/oxygen mix rammed into the combustion chamber for a boost in horsepower.
How much horsepower does a tunnel ram add?
Equipped with the Dart tunnel ram and dual King Demons, the 476 pumped out an even 900 horsepower and 670 lbs-ft of torque. Not only did the tunnel ram improve the peak power numbers, but the impressive induction system elevated to power and torque curves from 6000 rpm to 7400 rpm.
What is the advantage of a tunnel ram?
Tunnel ram intakes have the highest horsepower potential of all the manifold designs. The large, open plenum and straight, equal-length runners are the least restrictive. This means they can flow the most air. Tunnel rams also have a wider operating range than other types of manifolds.
Do tunnel Rams work?
Tunnel rams also have a wider operating range than other types of manifolds. They can make power from 1,500 to over 8,000 rpm. However, they still don’t perform very well off idle or during part throttle acceleration. This makes them great for race cars.
Will a tunnel ram add horsepower?
Tunnel ram intakes have the highest horsepower potential of all the manifold designs. Tunnel rams also have a wider operating range than other types of manifolds. They can make power from 1,500 to over 8,000 rpm.
Do tunnel ram engines work on the street?
Perhaps surprisingly, all the components for a tunnel ram setup are still available from mainstream suppliers like Speedway, Summit, and JEGS. They even offer complete street packages that include the manifold, carbs, and throttle linkage. The key to making a tunnel ram work on the street is to be sensible about your carb choices.
What is ededelbrock part number 7110 Street tunnel ram intake manifold?
Edelbrock part #7110 Street Tunnel Ram intake manifold is designed for 302-327-350-400 c.i.d. small-block Chevy V8’s operating below 7500 rpm where low-end torque is not a prime factor. Great for engines with slightly modified heads. Will not fit 1987 and later cast iron heads.
Are Edelbrock tunnel ram intakes any good?
Heck, Edelbrock even offers some of its tunnel ram intakes with injector bungs already cast into place. If you can wade through all the information (and misinformation) and get it sorted out, a tunnel-ram setup pretty much guarantees a big-time, old-school cool factor and in-your-face attitude.
Can you put a tunnel ram under the hood?
All that visual performance was further enhanced by the fact that a tunnel ram rarely fits under the hood, except on a few vehicles with massively deep engine compartments (1953-56 Ford F-100s come to mind.) Bolt a tunnel ram on your engine, and it’s gonna show.
