How do I fix Error 49 on HP printer?
How do I fix Error 49 on HP printer?
Turn the printer off, unplug the printer from the network/computer, clear any pending jobs from the print queue (on the computer), then reboot the printer to make the 49 error disappear. Then you can reconnect the network/computer cable and try printing again.
Why is my printer showing error message?
If your printer’s status displays “Printer in error state,” there may be a problem with the printer itself. Make sure the printer is turned on and connected to your PC by Wi-Fi or cable. Check it for low paper or ink, and be sure the cover isn’t open and the paper isn’t jammed.
How do I fix service error 79?
Solution: 79 Service error Turn off then on
- Turn the printer power off, wait at least 30 seconds, and then turn the power on and wait for it to initialize.
- If you are using a surge protector, remove it and plug the printer directly into the wall socket.
What does 79 service error mean?
Service error 79 on HP printers indicates that the print job is corrupted or the printer firmware is outdated. As a result, the spooler fails to communicate with the printer.
How do I fix error code 79 on HP printer?
How to Fix HP 79 Service Error On LaserJet Pro 200, 400, 500?
- Fix 1: Turn off then Turn on after 10 Seconds.
- Fix 2: Power off and Power Cycle Your HP Printer.
- Fix 3: Restart Your Devices.
- Fix 4: Try Reinstalling DIMM Again on Your HP Printer.
- Fix 5: Try Reinstalling Drivers for Your HP Printer.
Why does my HP LaserJet p4014 give error 49?
It is most likely triggered by a sequence of events that the printer firmware doesn’t cater for any other way. Early shipped LaserJet P4014, P4015 and P4515 printers were perhaps a little more prone to this than usual and if they still give error 49 regularly the firmware needs updating. Get a download from HP’s website.
How do I fix error code 49ff04?
I get this Failure error 49.ff04 every day on my printer. I need to turn off and on. What can I do to fix this? 12-20-2016 04:41 PM If the error is not caused by a print job then your first effort would be to update the firmware on the printer. If a firmware update does not resolve the issue then the problem could be a defective formatter.
Should I upgrade the firmware on my hp p4014 printer?
There have been well over a dozen firmware revisions for the P4014 series printers. There are two objections to upgrading firmware – mainly that is that it can be a bother trying to find it on HP’s website (It has wasted several minutes of my time more than once).
How do I fix error 49 on my HP laptop?
Updating the firmware solves most 49 errors. If 49 errors continue to occur intermittently, contact HP Support. If the 49 error will not clear from the control panel, perform these steps in the order presented. If at any time the step clears the error, you do not need to continue troubleshooting.
