How do I make my motorcycle exhaust shoot flames?
How do I make my motorcycle exhaust shoot flames?
To make your motorcycle shoot flames from the exhaust, you need to control the throttle in a specific way when the motorcycle is stationary or moving. You will also need an aftermarket exhaust as most stock pipes don’t work well. Another factor is the type of engine your motorcycle has.
How does a exhaust flame thrower kit work?
Car exhaust flame throwers work by interrupting the spark to the engine. This dumps raw fuel into the exhaust system. The fuel is ignited by a coil and spark plug placed right before the exhaust tip. The raw fuel strips the oil off the cylinder walls and contaminates the oil causing more wear and tear.
How do you make flames come out your exhaust?
How To Make Flames Come Out Of Your Exhaust?
- Use An Older Car. The first reason why we recommend you to use the old car is that you can cause an older car to backfire without much effort.
- Place A Spark Plug In The Exhaust.
- Use Kits To Throw Flames.
- Antilag.
- Mess With The Air/Fuel Ratio.
- ECU Programming.
Is shooting flames bad for your car?
The first piece to wear out is that exhaust valve, which can get burned with excessive fire-spitting. If those valves can’t close when fuel is ignited in the chamber, it leads to a lack of engine compression. The car’s performance will drastically dip, and the engine itself won’t operate properly.
Is backfire illegal?
Car backfires in and of itself are not illegal because in most cases, you didn’t do anything wrong and you’re just trying to get to work. However, if your car is backfiring loudly or excessively because you want it to and you’re causing a “disturbance”, police might look a little more closely at you.
Can you shoot flames with a muffler?
Yes, though it is illegal in most all locales. You need to put a Spark Plug into your exhaust pipe and run a wire from the Coil to the Spark Plug. Whenever you rev the engine any unburnt fuel in the exhaust will burst forth in flames.
Why do flames come out of motorcycle exhaust?
the rush of hot exhaust draws in outside air by venturi effect, the fresh oxygen and unburned fuel ignite by the hot temp. a bit of flame shoots out the exhaust.
How do you install a flame thrower exhaust system?
How To Install the Flame Thrower Exhaust System Find a location for the Control Box under the dashboard, on the firewall, etc. Mount it securely. Locate your vehicle’s existing coil. Connect a wire from the negative terminal on your vehicle’s coil to the GREEN wire on the Control Box.
Why choose Hot Licks exhaust flame thrower kits?
Hot Licks Exhaust Flame Thrower kits come 100% complete with everything you need to install the kit and shoot flames!
What size flame will my EFI application produce?
Stock EFI applications will produce 6-12 inch blow torch flames. Performance EFI applications can produce 12-24 inch flames. Naturally-aspirated / Carbureted applications can produce 12-24 inch blow torch flames. Kit comes 100% complete ready to install!
How big is the flame from a blow torch?
Some applications will only produce a small burst of flame similar to a backfire. Applications with a catalytic converter will not produce any flames. Stock EFI applications will produce 6-12 inch blow torch flames. Performance EFI applications can produce 12-24 inch flames.
