Common questions

How do I register unstructured scans ReCap?

author 0

How do I register unstructured scans ReCap?

Registering Unstructured Scans

  1. With an existing scan project open, or during the project creation process, navigate to, and select files to add to the project.
  2. Select an unstructured file for registration.
  3. Follow standard Manual Registration procedure, selecting the same point features in each image.

What is balance in ReCap?

Balance: shows the percentage of common features in the scan. If you were scanning a parking lot with few three-dimensional features, you could get the two surfaces to overlap with a small error, but they still might not be registered well because they could slide in relation to each other.

How do I align scans in Recap pro?

Solution:

  1. Open the project.
  2. Hover over the Home button.
  3. Go to Registration to see the registration results.
  4. Search the problematic scan From the left side of the screen.
  5. Remove the scan from the group. The scan will be moved on the right side of the screen.
  6. Register the scan in the correct position.

How do I move a scan in recap?

How do I move point cloud ReCap?

Three survey points need to be create in two adjacent scans in order to move a model in ReCap Pro. Once the survey points are matched in the two scans, the project will move after selecting “return to project”.

How do you rotate a point cloud in ReCap?

In ReCap, there is an “update origin” tool so that you can snap to one surface in the point cloud to adjust x/y/z axis to rotate the point cloud.

How do I clean my point cloud?

How:

  1. In ReCap, put your objects into regions. Hide points that you don’t want to put in a region.
  2. Hide the points assigned to the Floor region.
  3. Use fence selection to select other objects and put them in separate regions.
  4. Afterwards define all the regions, unhide the regions that you want to see.

What is ReCap intensity clipping?

Sets the size of the point cloud by setting distance and intensity ranges. Intensity Clipping: Determines the range of intensity values to allow for included points.

How do I change my point cloud?

In order to edit the point cloud in the rayCloud:

  1. On menu bar, click View > rayCloud.
  2. If the densified point cloud is not loaded or displayed in the 3D view: In the section Layers on the left sidebar, select Point Clouds.

How do I reduce point cloud?

Point cloud file sizes can be drastically reduced by changing the spacing between the unified points. Specify this point spacing during the export to RCP\RCS process. Start the Export command and specify what the exported file will be called and where it will be saved.

author

Back to Top