Other

How do I reset my Brother MFC 7860DW?

author 0

How do I reset my Brother MFC 7860DW?

◊ How to Reset Toner Counter for Brother MFC-7860DW

  1. Open the compartment door in front of printer. Brother MFC-7860DW
  2. Check “Front cover open” Message.
  3. Press the “Clear” button.
  4. Read “Replace Drum?” Message.
  5. DO NOTrespond to this.
  6. Instead!

How do you reset the drum counter on a Brother printer MFC?

To reset the drum counter:

  1. Press the UP OR DOWN ARROW key to select Machine Info.
  2. Press the UP OR DOWN ARROW key to select Reset Parts Life.
  3. Press the UP OR DOWN ARROW key to select Drum Unit.
  4. Press the UP ARROW key to reset the drum unit counter.
  5. The display will show ‘Accepted’ and the machine will return to ‘Ready’.

How do you reset the drum on a Brother printer mfc 7360n?

Open the machines front door where you would replace the cartridges. On the top panel you will see a “clear/back” button. Press it and on the display you will see a reset menu come up. Arrow to desired item (toner, drum etc) and press the OK button.

How do you reset the drum counter on a Brother MFC L2710DW?

How to reset the drum counter:

  1. The printer should be on.
  2. Close the front of the printer.
  3. Hold down the “OK” button and the “up” arrow at the same time.
  4. Press the “OK” button to select “Drum”.
  5. Press the “up” arrow to reset the counter.

How do you change the drum on a Brother MFC 7340?

Replacing the drum unit

  1. Make sure that the machine is turned on.
  2. Open the front cover.
  3. Remove the toner cartridge and drum unit assembly from the machine.
  4. Push down the green lock lever and take the toner cartridge out of the drum unit.
  5. Unpack the new drum unit.

How do I bypass toner life end on my Brother?

To reset the ‘Toner Life End’/’Replace Toner’ message on Brother MFC monochrome (black and white) printers:

  1. Open the door and press the Clear/Back key.
  2. Press *00.
  3. Press OK.
  4. Do not choose anything for drum replacement. When the drum replacement menu comes up, press * and then 00, then press OK.

How do I reset the toner counter on my brother mfc-7860dw?

Brother MFC-7860DW Reset Toner Counter 1 Open the compartment door in front of printer. Brother MFC-7860DW 2 Check ” Front cover open ” Message. 3 Press the ” Clear ” button. 4 Read “Replace Drum?” Message. 5 DO NOT respond to this. 6 Instead! Type in ” *00 ” on the keypad.

How do I replace the drum on my brother mfc-7360n printer?

Open the front panel of your Brother MFC-7360N or MFC-7860DW Multifunction printer. Press the Clear/Back button. A display message will then show “REPLACE DRUM?

How do I reset the drum counter?

Resetting the drum counter is easy. Just follow the steps below: How to Reset Brother Drum Counter: 1. With the front cover open, press Clear. To confirm you are installing a new drum unit, press 1. 2. When the LCD shows Accepted, close the front cover.

How do I reset the toner counter on the mfc7360n?

Close the front door. The toner counter is then reset. This has been tested on the MFC7360N and MFC7860DW but should also work on any other MFC multifunction printers that use the TN2250 cartridge.

author

Back to Top