How do you change the head on a Stihl AutoCut 25 2?
How do you change the head on a Stihl AutoCut 25 2?
Push the locking pin or the offset screwdriver into the hole in the gearbox. Now turn the shaft until the locking pin engages and locks the shaft in position. Turn the mowing head anti-clockwise until it reaches the stop on the shaft. With the shaft immobilized, tighten up the mowing head.
What size line does a Stihl AutoCut 25 2 use?
For example, the Stihl AutoCut 25-2 requires either a . 08-inch line or a . 095-inch line.
How does Stihl AutoCut work?
The AutoCut mowing head has a line storage device and the line is fed while the machine is running. This is done by tapping the top of the mowing head on the ground. This opens the holding mechanism for the line and centrifugal force causes line to be fed out.
Does echo speed feed 400?
ECHO Speed-Feed 400 is built for rugged applications where medium to heavy-duty cutting are required. The universal Speed-Feed Head – 99944200907 is compatible with ECHO SRM trimmers, as well as other brand trimmer models. The GT version – 99944200908 will only fit ECHO GT curved shaft trimmers.
How does the autocut 25-2 work?
AutoCut 25-2. The AutoCut mowing head has a line storage device and the line is fed while the machine is running. This is done by tapping the top of the mowing head on the ground. This opens the holding mechanism for the line and centrifugal force causes line to be fed out.
How does the autocut mowing head work?
The AutoCut mowing head has a line storage device and the line is fed while the machine is running. This is done by tapping the top of the mowing head on the ground. This opens the holding mechanism for the line and centrifugal force causes line to be fed out.
How does the autocut C head work?
The AutoCut C head has an on-board line storage spool and the line is fed while the machine is running. This is done by tapping the end of the spool on the ground, which momentarily releases the locking mechanism allowing centrifugal force to advance a measured length of line.
What is the diameter of the Stihl 4002-710-2191 auto cut head?
STIHL 4002-710-2191 auto cut head uses a 25-2 blade type and has a standard diameter of .095-inch. This auto cut head has a double line for trimming and mowing. The nylon line is fed automatically by tap action. Would you like to tell us about a lower price?
https://www.youtube.com/watch?v=6hU-rh41T7c
