How do you fix fence post spikes?

How do you fix fence post spikes?

Starts here5:56Install a METPOST | FENCE SPIKE | Like a Professional Fencer – YouTubeYouTubeStart of suggested clipEnd of suggested clip55 second suggested clipIn. Check plumb when driving in the spike. You want to just let the sledgehammer do the work for youMoreIn. Check plumb when driving in the spike. You want to just let the sledgehammer do the work for you you don’t want to be swinging down really hard on top of this. Just light taps.

What size are fencing posts?

Calculate the post lengths If you’re setting wooden or concrete posts in concrete you’ll need 8ft (2.4m) posts for a 6ft (1.828m) fence – i.e. your posts are 2ft (0.6m) longer than the fence height. Use 4in x 4in posts for fences of 5ft and over and 3in x 3in posts for anything under 5ft.

How do you install ground spikes?

Starts here1:18How to install a Ground Spike – YouTubeYouTubeStart of suggested clipEnd of suggested clip50 second suggested clipThe first thing to do is to dig a hole. The same depth as your ground spike and about a spades widthMoreThe first thing to do is to dig a hole. The same depth as your ground spike and about a spades width wide. Put the ground spike in the hole. And then add the post mix concrete.

How do you fix a bolt in a fence post?

Starts here1:30How to fix a fence post onto concrete – YouTubeYouTubeStart of suggested clipEnd of suggested clip56 second suggested clipAnd masonry drill bits. Move the post support back over the holes. And fix into place with theMoreAnd masonry drill bits. Move the post support back over the holes. And fix into place with the concrete fixing bolts insert the post and tighten up the bolts to hold the post in place.

How do you fit post spikes?

Starts here6:30How to install a METPOST/Fence Spike like a pro! – YouTubeYouTube

How long should a fence post spike be?

The most common sizes of metal spike include: A 600mm (24 inch) spike – this will support fences up to 1.2m (4 feet) high. A 750mm (30 inch) spike – this will support a fence which is 1.8m (6 feet) high. In order to drive the spike into position you will need to use a sledgehammer and/or driving tool.

How deep should a fence post be UK?

The 2 ft Rule Lawsons experts recommend you should dig a hole which has a depth of 2 ft (24 in / 600mm) to ensure you have a stable timber or concrete fence post.

How do you build a fence with post spikes?

Can I concrete in fence spikes?

Fixing fence posts into concrete is the most common way to erect fencing, but drive-in metal post spikes provide a sturdy alternative that is suitable for many domestic fencing applications.

Are fence post Spikes good?

The main advantage of metal fence spikes for post support is their ease of installation, using only simple tools with no need for digging or concrete. Even high-quality treated timber posts will decay to some degree over time when sitting in concrete. If a fence post does fail it is easily removed and replaced.

How good are post spikes?

Fixing fence posts into concrete is the most common way to erect fencing, but drive-in metal post spikes provide a sturdy alternative that is suitable for many domestic fencing applications. The main advantages of post spikes are: simple to install. provide protection to the base of the fence post from water.

How to straighten a fence post?

Straightening a Leaning Post Set in the Soil. If your fence posts sit directly in the soil, it is not unusual to have…

Posts Set in Concrete Footers. Fence posts set in concrete footers that begin to lean are often a sign of more serious…

Keeping Things Sturdy and Straight. Like any other structure, fences…

How to repair a broken fence post?

Start by removing the tie wires closest to the damaged section using pliers.

Next,connect a fence puller to both the post and fence and draw the fence tight enough to take tension off the tension bar.

Remove the damaged section by opening the loop at the top and bottom of a strand just outside the damaged area.

What is the length of a fence post?

Fence posts dimensions. Pressure treated pine or cedar post for fences normally have 4” x 4” or 6” x 6” nominal dimensions and sold 6’ or 8’ long. Vinyl posts normally 4” x 4”, 5” x 5” and 6” x 6” and length vary from 72” to 102”.

What is a fence post sleeve?

A Postsaver fence post sleeve keeps the causes of rot out and the preservative in at the post sleeve protected part of the posts or treated utility poles. This totally prevents conventional ground rot and post or pole failure.