What is a 7000 Form?

What is a 7000 Form?

A Form 7000-1 shall be completed and mailed within ten working days after an accident or occupa- tional injury occurs, or an occupational illness is diagnosed. This report is required by law (30 U.S.C. Failure to report can result in the institution of a civil action for relief under 30 U.S.C.

What is MSHA 7000-1?

Form ID: 7000-1. Description: If an accident, injury or illness occurs at or in conjunction with activity at a mine, mine operators are required to report the circumstances of the incident to MSHA using.

What is MSHA reportable?

To report an accident or a hazardous condition, call 1-800-746-1553. MSHA’s toll-free emergency line is staffed 24 hours a day. Call this number to immediately report a mining accident or a hazardous condition at a mine, an impoundment, or an abandoned mine.

When an accident occurs at a mine the mine operator must notify MSHA within?

Mine operators must call immediately, but no later than 15 minutes from the time they know or should know that an accident has occurred.

How do I report to MSHA?

Call 1-800-746-1553 to report an accident or anonymously report a hazardous condition. Find additional emergency information and access MSHA’s online Hazardous Condition Complaint system.

How long do you have to report an accident to MSHA?

A Form 7000-1 shall be completed and mailed within ten working days after an accident or occupa- tional injury occurs, or an occupational illness is diagnosed. This report is required by law (30 U.S.C.

What do you do if you are stuck in a mine?

In most cases, a miner would put on his SCSR and then make for the nearest safe escape route. His best bet would be an intake passage, which links to the outside and provides fresh air to the mine. Intake routes are marked all the way to the exit with color-coded reflectors.

Is MSHA federal?

The Mine Safety and Health Administration (MSHA) (/ˈɛmʃə/) is a large agency of the United States Department of Labor which administers the provisions of the Federal Mine Safety and Health Act of 1977 (Mine Act) to enforce compliance with mandatory safety and health standards as a means to eliminate fatal accidents, to …

How do I find my MSHA ID number?

How do I get a MIIN?

  1. Go online at www.msha.gov then click on Forms/Online Filing, and then on MSHA Individual Identification Number Request (5000-46) .
  2. Call the toll-free phone number 1 800-579-2647.

How do I contact MSHA?

Call 1-800-746-1553 to report an accident or anonymously report a hazardous condition.

Did all the miners get out?

All 39 miners who originally became trapped underground at the Totten Mine in Sudbury, Ont., on Sunday have been rescued and are safe, the company that owns the mine confirmed. Vale said the last four miners who were climbing their way to the surface on Tuesday reached the top by early Wednesday.

Is exploring abandoned mines illegal?

Although a mine may appear abandoned it does belong to someone and trespassing laws do apply. Anyone rescued from an abandoned mine may face criminal trespass charges. Tools, equipment, building materials, and other items on mine sites are not to be taken.

How do I fill out an MSHA form 7000-1?

Form 7000-1. Form 7000-1, Mine Accident, Injury and Illness Report can be filed online electronically or the form fill version can be completed, printed (or printed and filled in manually) and sent to MSHA according to the instructions provided below. Form 7000-1, Mine Accident, Injury and Illness Report is a four-part, color-coded form.

What is form 7000-1 and how do I file it?

Form 7000-1, Mine Accident, Injury and Illness Report is a four-part, color-coded form. If filing online, copies will be sent electronically to the appropriate offices.

What information do mine operators need to report to MSHA?

Mine operators and independent contractors are required to report employment and production information to MSHA using this form for each quarter of operation and at each mine at which activity is performed.

Who is required to submit information to MSHA?

All instructors are required to submit to MSHA the names of persons who have satisfactorily completed required electrical training. MSHA uses the form information to issue certification cards to those persons who are qualified.

author

Back to Top