Common questions

What is the default WIFI password for Dlink router?

author 0

What is the default WIFI password for Dlink router?

Step 1: Open your web browser and enter http://dlinkrouter or http://dlinkrouter.local or http://192.168.0.1 into the address bar. The default username is Admin and the password is blank (nothing).

How do I change my D Link DIR-300 WIFI password?

How do I change my D-Link Router’s password?

  1. Step 1: Open your Internet browser and enter.
  2. Step 2: Enter the password for your Admin account in the field provided.
  3. Step 3: Locate the Wireless Settings from the drop down menus.
  4. Step 4: In the Password field, specify the new wireless password for the desired wireless band.

How do I configure my Dlink router DIR-300?

How to setup WPA-PSK / WPA2-PSK for DIR-300

  1. Step 1 Connect Your PC (Laptop) to the Router (Port 1,2,3,4 either one of them) using Network cable.
  2. Step 2 Launch your IE (Internet explorer) and key in 192.168.
  3. Step 3 Enter your Username: admin and no password (if it is default) click on OK.

What is the password for Dlink?

Type 192.168. 0.1 (the most common IP for Dlink routers) in the address bar of your web browser to access the router’s web-based user interface. The default username for your Dlink router is admin. The default password is (blank).

How do I find my D-Link admin password?

Resetting your D-Link® router’s Wi-Fi password is easy: Type your router’s IP address —192.168. 0.1— into your Web browser. At the login screen, select “Admin” from the drop down menu and enter your admin password.

How do I reset my Dlink DIR 300?

Locate the reset pin hole on the back of the DIR-300 as per below: 2. Insert a paperclip into the reset pin hole and hold in for 10 seconds. While holding in the reset button, refer to the Status LED, when it starts to blink rapidly, release the paperclip holding in the reset button.

How do I setup a password for my router?

To change your router’s password:

  1. Enter your router’s IP address into your favorite web browser.
  2. Log in with the default username and password (both admin, usually).
  3. Go to settings.
  4. Select Change Router Password or a similar option.
  5. Enter the new password.
  6. Save the new settings.

Where is my network security key D-Link?

Finding your D-Link router security settings Open your Web browser and enter http://192.168.0.1 in the Address field. 2. Click the Wireless button in the left pane. The required SSID and WEP key information is included on this screen.

How do I reset my Dlink router?

How do I reset my router to factory default settings?

  1. Step 1: With the router on, insert the end of a paper clip into the pinhole highlighted below.
  2. Step 2: Hold the paper clip down for 10 seconds and release.
  3. Step 3: The unit will reboot automatically. Once the WLAN light stops blinking, the unit has been reset.
  4. Note:

How do I login as admin on WiFi?

Login to Router admin panel using its default IP Address – 192.168.0.1 / 192.168.1.1. Enter the default username and password (admin/admin in most cases). Navigate to Wireless > Wireless Security > WPA/WPA2 – Personal (Recommended) > Password .

How do I reset my D-Link admin password?

3 Answers. For most D-link routers you can power on the router, find the “reset” button (it will be recessed on the bottom or back) so get something link a paperclip and hold it down for 10 seconds approx. until the router’s lights blink. The default admin name & pass should now be restored.

What is the default D-Link dir-300 router username and password?

The Default D-Link DIR-300 Router Username is: admin The Default D-Link DIR-300 Router Password is: blank Enter your username and password, and then click the Login button to log in to your Dlink DIR-300 router. If your username and password do not work then please visit our Default D-Link Router Passwords page.

Why do I need to open a port on my dir-300?

Dlink DIR-300 routers include a very basic firewall that helps protect your home network form unwanted access from the internet. Since this firewall blocks incoming connections you may need open a port through it for certain games and applications.

What is the default login and password for the router?

The router user interface will open. Provided that the original login and password have not been changed, the default login is “admin” and the default password is “admin” too. If the password has been changed to a forgotten or unknown one, perform a Factory Reset of the device.

author

Back to Top