# What is the length of corrugated bar?

## What is the length of corrugated bar?

Pag-asa Steel rebars come in the following commercial lengths: 6.0m, 7.5m, 9.0m, 10.5m, and 12.0 m. Special lengths of 13.5 and 15.0 meters may be produced via special order.

## What is the standard length of steel bars?

Based on various standards, Imperial and metric system measurement, typicaly, length of one Steel bar/ rebar of size 8mm, 10mm, 12mm, 16mm, 20mm and 25mm is kept around 40 feet or 12m long. This is standard length of steel bar used for various construction project.

**What is development length of bars for HYSD grade concrete?**

Ld= 0.87 X grade of steel X Dia of bar / 4 X bond stress of concrete . Value of Bond stress can be increased by 60% when high yield strength deformed( HYSD) bars are used. It can be further increased by 25% when we calculate development length for bars in compression.

**What is the standard length of a reinforcement bar?**

The deformed Reinforcing Steel Bar is supplied in length of 9m or 12 m as common sizes. The steel bar diameter applied is different and accordingly the weight varies.

### What is the length of 8mm steel bar?

40 Feet

Product Specification

Diameter | 8mm |
---|---|

Type | TMT Coil |

Unit Length | 40 Feet |

Grade | Fe 550 |

Material | Iron |

### What is development length ld?

Development length is the extra length of a bar provided beyond the required section in order to ensure the following:- To develop a safe bond between the bar surface& the concrete so that no failure due to slippage of bar occurs during the ultimate load conditions.

**How do you calculate pipe development length?**

Things You Will Need

- Align a tape measure along the center of a pipe and measure the pipe’s length.
- Write down the appropriate measurement for the fitting that is used on the specific type of pipe.
- Multiply the fitting measurement times 2 to account for the fittings on either end.

**What is the length of a bar?**

Generally in countries with metric system the standard length is 12 metres. In the US it would be 40 feet.

#### How do you calculate the length of a steel bar?

10mm dia bar = (10x10x1)/162.28 = 0.616kg. 12mm dia bar = (12x12x1)/162.28 = 0.8874kg.

#### What is the length of 25mm steel bar?

Product Specification

Brand | Shree |
---|---|

Diameter | 25mm |

Unit Length | 12 m |

Usage/Application | Construction |

Grade | Fe 500 |