Which is better RAM 1600MHz or 1333MHz?

Which is better RAM 1600MHz or 1333MHz?

The performance difference is less than 3% in most real-world games and applications; only the most memory-intensive workloads, memory-specific benchmarks and gaming on IGP show significant differences. As Jack said, the prices are usually practically the same, so might as well go with 1600.

Is 1600MHz RAM compatible with 1333MHz?

RAM speed is set by your motherboard and processor combination. In short, yes 1600mhz ram will work at 1333mhz just fine.

Is the difference between DDR3 1333MHz and DDR3 1600MHz?

There is really no performance difference between running the RAM at 1333MHz compared to 1600MHz. The reason to buy 1600MHz is if you are heavily OCing. When you OC the CPU (unless you’ve got an unlocked multi like the 955) you also change the frequency the RAM.

How do I overclock my RAM DDR3 1333 to 1600?

The RAM however might not, I’ve usually not seen any basic DDR3 go very high, but 1333MHz to 1600MHz might be doable, set the speed to 1600 if you can, RAM voltage to 1.55 to 1.65 and set the timings to CL11-11-11-28 as a starting point, and see if that’s stable, or you could just see if 1600 is stable at stock, and …

Is 1600 MHz RAM fast?

1600mhz is better grade Double Data Rate 3rd or ddr3 ram type chip that is better than previous ddr3 ones with 800mhz, 1066mhz, 1366/1386mhz. 1600mhz is minimal fast ram you will require for gaming.

What happens if I use ram of a faster speed than the CPU supports?

It makes no difference. If the RAM run as a faster frequency then supported by the CPU it will be ran at the frequency that is supported. The simple fact is your unlikely to see a difference unless you double or triple the difference of difference memory.

Can I put 1600MHz ram in a 1066mhz slot?

So the answer is that 1600 Mhz memory modules may not work in a slot that supports only upto 1066 Mhz.

Can you overclock 1333 RAM?

Honorable. Make sure the voltage is set at 1.5, and just set the RAM to run at 1600Mhz in your BIOS. Download memtest86 and install it to a USB flash drive, boot from it and run at least 8 passes. If it passes without errors, you’re good to go!

Is it safe to overclock DDR3?

The stock voltage with DDR3 is 1.5 volts. Most overclocking memory requires a 1.65 voltage and in reality there’s no reason to go above 1.85 volts, while for general use 1.7 volts is a safe maximum.

What is the difference between 1333 and 1600 MHz RAM?

In conclusion, the difference between 1333 and 1600 is in the frequency of the clock, and in the intensity of the heating and consequently in the performance. However, the choice is not as simple as it seems. The fact that, with the release of DDR3, the RAM controller started to be installed directly on the processor.

What is the difference between DDR3-1333 and DDR3 – 1600?

Answer Wiki. The term you are looking for is minimally. The 1333 and 1600 designations refer to the transfer rates – theoretically, given same CAS latency, DDR3-1600 would perform better than DDR3-1333 due to its greater maximum bandwidth.

What is the speed of the 1333 Ram in the inverter?

The 1333 DDR3 RAM operates at a clock frequency of 667 MHz. At the same time, the actual speed of the inverter is 1333 megatransfers per second. That is, 1.3 million signals are transmitted in 1 second.

Is a 1333 or a 1600 better set of sticks?

1600 would be a little better — IF it is a better set of sticks, if you go and buy 1600/11 and already have 1333/9 then the 1333 will better overall performance wise, but if you have slow 1333 say 10 or 11 CL and get a good set of 1600/7 or 8 the 1600 will show the better performance where you might notice a bit 0 Vic 40